 |
PRODUCT DATA SHEET 30.12.2005 |
|||||||||||||||||
Temacryl AR 50 |
||||||||||||||||||
| DESCRIPTION | A physically drying, one component semigloss acrylic based topcoat. | |||||||||||||||||
| PRODUCT FEATURES | Recommended for surfaces exposed to marine or industrial climates and mild chemical stress. | |||||||||||||||||
| RECOMMENDED USES | Bridges, cranes, conveyors, harbour equipment and tank exteriors. | |||||||||||||||||
| TECHNICAL DATA | ||||||||||||||||||
| Features | High film build properties. Can be applied at low temperatures. Tolerates temperatures up to 80 ºC dry heat. | |||||||||||||||||
| Colour Cards | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||||||
| Gloss groups | Semi-gloss | |||||||||||||||||
| Coverage |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||
| Thinner | 1006 and 1053 | |||||||||||||||||
| Application method | By airless spray or brush. | |||||||||||||||||
| Drying times |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||
| Solids volume | 40 ± 2 % volume (ISO 3233)
55 ± 2 % weight |
|||||||||||||||||
| Density | 1.1 - 1.3 kg / l depending on colour | |||||||||||||||||
| Product code | 198-series | |||||||||||||||||
| APPLICATION DETAILS | ||||||||||||||||||
| Application conditions | All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below - 5 ºC during application and drying. Relative humidity should not exceed 85 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. | |||||||||||||||||
| Preparation | Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) | |||||||||||||||||
| Priming | TEMANYL MS PRIMER, TEMASIL 90, TEMAZINC 77, TEMAZINC 88 and TEMAZINC 99. | |||||||||||||||||
| Finishing | TEMACRYL AR 50. | |||||||||||||||||
| Painting | By airless spray or brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 15 %. Airless spray nozzle tip 0.013" - 0.019" and pressure 120 -180 bar. Spray angle shall be chosen according to the shape of the object. | |||||||||||||||||
| Cleaning of tools | Thinner 1006 or Thinner 1053. | |||||||||||||||||
| EU VOC 2004/42/EC-limit value | The Volatile Organic Compounds amount is 540 g/litre of paint.
VOC of the paint (thinned 15 % by volume) is 590 g/l. |
|||||||||||||||||
| HEALTH AND SAFETY CLASSIFICATION | ||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||||||
| Product safety data sheet | TEMACRYL AR 50 [GB-ENG] | |||||||||||||||||
| Thinner safety data sheet | THINNER 1006 [GB-ENG] | |||||||||||||||||
| - | ||||||||||||||||||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
