 |
PRODUCT DATA SHEET 03.01.2006 |
|||||||||||||||||
Temaprime EUR |
||||||||||||||||||
| DESCRIPTION | A fast drying, one component anti-corrosive alkyd primer. | |||||||||||||||||
| PRODUCT FEATURES | Primer in alkyd systems for steel surfaces exposed to weathering. Ideal for use in assembling plants and painting stations with rapid production cycles. Can also be used without any topcoat for steel surfaces in dry indoor areas. | |||||||||||||||||
| RECOMMENDED USES | Recommended for steel structures, agricultural, construction and other machinery. | |||||||||||||||||
| TECHNICAL DATA | ||||||||||||||||||
| Colour Range | Reddish brown (TVT 4000) and grey (TVT 4001). TEMASPEED tinting. | |||||||||||||||||
| Gloss groups | Matt | |||||||||||||||||
| Coverage |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||
| Thinner | 1006 and 1053 | |||||||||||||||||
| Application method | By airless spray or by brush | |||||||||||||||||
| Drying times |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||
| Solids volume | 51 ± 2 % volume (ISO 3233)
70 ± 2 % weight |
|||||||||||||||||
| Density | 1.3 kg / l | |||||||||||||||||
| Product code | 186-series | |||||||||||||||||
| APPLICATION DETAILS | ||||||||||||||||||
| Application conditions | All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. | |||||||||||||||||
| Preparation | Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean at least to grade Sa2. Clean small damages by tool cleaning to St2. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion. Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) |
|||||||||||||||||
| Priming | TEMAPRIME EUR. | |||||||||||||||||
| Finishing | TEMALAC, FONTECRYL and FONTELAC. | |||||||||||||||||
| Painting | By airless spray or by brush. Mix the paint thoroughly before use. The paint can be thinned 0 - 15 % at airless spray application. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. | |||||||||||||||||
| Cleaning of tools | Thinner 1006. | |||||||||||||||||
| EU VOC 2004/42/EC-limit value | The Volatile Organic Compounds amount is 440 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 15 % by volume) is 495 g/l. |
|||||||||||||||||
| HEALTH AND SAFETY CLASSIFICATION | ||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||||||
| Product safety data sheet | TEMAPRIME EUR [GB-ENG] | |||||||||||||||||
| Thinner safety data sheet | THINNER 1006 [GB-ENG] | |||||||||||||||||
| - | ||||||||||||||||||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
