 |
PRODUCT DATA SHEET 02.01.2006 |
|||||||||||||||||||||
Temalac FD 80 |
||||||||||||||||||||||
| DESCRIPTION | A fast drying, one component glossy alkyd topcoat. | |||||||||||||||||||||
| PRODUCT FEATURES | A glossy, alkyd based topcoat for steel surfaces. Excellent gloss and colour retention when exposed to weathering. Ideal for use in machine shops with fast production cycles and in the field. Suitable also for electrostatic painting. | |||||||||||||||||||||
| RECOMMENDED USES | Recommended for steel structures, service platforms and different types of machinery and equipment. | |||||||||||||||||||||
| TECHNICAL DATA | ||||||||||||||||||||||
| Colour Cards | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||||||||||
| Gloss groups | Gloss | |||||||||||||||||||||
| Coverage |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||||||
| Thinner | 1006 and 1053 | |||||||||||||||||||||
| Application method | Airless or conventional spray. | |||||||||||||||||||||
| Drying times |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||||||
| Solids volume | 45 ± 2 % volume (ISO 3233)
62 ± 2 % weight |
|||||||||||||||||||||
| Density | 1.0 - 1.2 kg / l depending on colour | |||||||||||||||||||||
| Product code | 180-series | |||||||||||||||||||||
| APPLICATION DETAILS | ||||||||||||||||||||||
| Application conditions | All surfaces must be dry. The temperature of the ambient air, surface and paint should not fall below + 5 ºC during application and drying. Relative humidity should not exceed 80 %. The temperature of the substrate should remain at least 3 ºC above the dew point. | |||||||||||||||||||||
| Preparation | Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) | |||||||||||||||||||||
| Priming | TEMAPRIME EE, TEMAPRIME EUR, TEMAPRIME GF, TEMAPRIME ML and FONTECRYL 10. | |||||||||||||||||||||
| Finishing | TEMALAC FD 80. | |||||||||||||||||||||
| Painting | Airless or conventional spray. Mix the paint thoroughly before use. With airless spray the paint should be thinned 15 - 20 % to a viscosity of 30 - 40 s DIN 4. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. At conventional spray the paint should be thinned 20 - 30 % to a viscosity of 20 - 25 s DIN 4. "Wet-on-wet" spraying technique is recommended. For large surfaces use Thinner 1053 (slow). | |||||||||||||||||||||
| Cleaning of tools | Thinner 1006. | |||||||||||||||||||||
| EU VOC 2004/42/EC-limit value | The Volatile Organic Compounds amount is 470 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 30 % by volume) is 560 g/l. |
|||||||||||||||||||||
| HEALTH AND SAFETY CLASSIFICATION | ||||||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||||||||||
| Product safety data sheet | TEMALAC FD 80 [GB-ENG] | |||||||||||||||||||||
| Thinner safety data sheet | THINNER 1006 [GB-ENG] | |||||||||||||||||||||
| - | ||||||||||||||||||||||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
