PRODUCT DATA SHEET
12.08.2016

Fontefacade CC 30 - Acrylate single-coat paint

 
Tikkurila Industry 9L
DESCRIPTION A water-borne one-component, acrylate exterior single-coat paint.
PRODUCT FEATURES

Recommended for fast production lines and drying in elevated temperature as well as in room temperature. Especially suitable for roller and curtain coating.

The paint can be used as a primer and a topcoat.

Recommended uses Suitable for exterior mineral substrates such as fibre-cement flat sheets.

TECHNICAL DATA
Features • Good anti-blocking properties.
• Good weathering resistance.
Heat of Combustion (PCS): 16.7 MJ/kg according to the standard EN ISO 1716
Base paints A, C and MET
Colour Cards The shades of the Tikkurila Facade color card, RAL and NCS color card for exterior use.
Avatint tinting system. MET-base for Metallic shades.
Gloss groups Semi-matt
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

final surface

 40–70 µm

100–200 g/m²

10–12 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner Water
Application method Roller, spray or curtain coater.
Drying times

150 g/m²

+23ºC

+40ºC

Dry to touch, after

60 min

15 min


Final mechanical properties are achieved after several days. Drying and recoating times are related to the wet film thickness, thinning, color shade, temperature, the relative humidity of the air and ventilation.
Solids volume 35 volume %
47 weight %
Density 1.2 kg/l
Storage Must not freeze. The best storage temperature is between +15–+25°C.
Product code 73V-series.

APPLICATION DETAILS
Application conditions The surface to be treated has to be clean and dry. During application and drying temperature of the air, substrate and paint must be over +10°C and relative humidity of the air below 70%. Good ventilation is also very important.
Preparation Surfaces must be free of dirt, dust and grease.
Priming Fontefacade CC 30.
Diluting Paint is recommended to be used without thinning. If needed thin with water max 5%.
Application For curtain coating, the product is thinned approximately 0–5% to the viscosity 50–80s (DIN4). Avoid too high pumping pressure and flowing speed.
Mixing of components Stir the paint carefully before use.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value According to VOC Directive 2004/42/EU the product subcategory A/c VOC limit (1.1.2010) is maximum 40 g/l. VOC content of "Fontefacade CC 30" is 40±10 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
-
Safety data sheetFONTEFACADE CC 30
 
ENVIRONMENTAL and WASTE DISPOSAL Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial use only.
-


Back