Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Luminol 25 N

A water-borne UV-curing paint for interior surfaces.

The paint is water-borneTool: spray
The coverage of the paint on rough surfaces
8
m2/l
The coverage of the paint on smooth surfaces
10
m2/l

Good stacking properties

Luminol 25 N is a fast-drying water-borne UV-curing paint based on unique urethane polyester. The paint is suitable for rapid production lines. 


Excellent abrasion and chemical resistance

As a UV-curing paint Luminol 25 N has excellent resistance to the household use. The paint is especially developed for furniture, doors of kitchen fittings and other interior wooden surfaces.



Luminol 25 N is widely used for:




Stain, lacquer and paint systems for wood industries


PRODUCT DATA SHEET
09.08.2011

Luminol 25 N - UV-curing water-borne paint

 
Luminol 25 N
DESCRIPTION UV-curing, water-borne urethane polyester paint.
PRODUCT FEATURES Wooden surfaces indoors. Good abrasion and chemical resistance.
Recommended uses Recommended for furniture, doors of kitchen fittings and other wooden surfaces indoors.

TECHNICAL DATA
Colour Range White (NCS S 0502-Y). Other colors by request.
Gloss groups Semi-matt
Gloss measurement standard ISO 2813/60º
Coverage

8 - 10 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner Water
Application method

Application technique

Viscosity DIN4

Low pressure spraying

40 - 60 s

Airmix or airless spraying

40 - 60 s

Drying times (90 - 110 g/m2)

Dry to stack immediately after UV curing.

Flash-off 1 min / 23 ºC + 5 min / 50 ºC before UV-curing.

Flash-off time depends on the temperature and the efficiency of the ventilation.

Required UV-energy: 500 mJ/cm2 + 500 mJ/cm2. For proper curing of thicker layers, use both Gallium and Mercury lamps in UV-curing.
Solids volume abt. 35 % by volume, 48 % by weight.
Density 1.2 kg/litre
Product code 960 7162 (White), 960 7087 (NCS S 0502-Y)

APPLICATION DETAILS
Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %.
Painting Stir the paint carefully before use. Thin with water to the viscosity required.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount to 4 g/litre of paint.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetLuminol 25 N
 
-


Back

Counter for wood finishes

Tikkurila offers wide range of paint and lacquer systems for different wood industries. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for wood finishes

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.