Working instructions
Product data sheet
Paint calculator
Safety Data Sheets

Pinja Flex 30

A one-component water-borne acrylate paint for exterior surfaces.

The paint is water-borneTool: spray
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces

Flexible paint for windows and exterior doors

Pinja Flex 30 is a flexible water-borne topcoat developed especially for windows and exterior doors. It protects againts rain and hail, snow and sun.

Fast-drying acrylate paint

As a fast-drying topcoat Pinja Flex 30 has good stacking properties and is mostly used on production lines. It can be applied by airless, air-assisted airless spraying and electrostatic spraying.

Pinja Flex 30 is mosly used for:

Stain, lacquer and paint systems for wood industries


Pinja Flex 30 - Acrylate paint

Pinja Flex 30
DESCRIPTION A water-borne acrylate paint.
PRODUCT FEATURES A fast-drying and flexible paint for exterior use.
Recommended uses Suitable for wooden window frames and front doors.

Colour Range AVATINT tinting. For exterior use it is recommended to use the shades from the Wooden Facades color card.
Gloss groups Semi-gloss
Gloss measurement standard ISO 2813/60º

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 155 g/m2

50 µm

8 - 9 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner Water
Application method Airless spraying, air-assisted airless spraying and electrostatic spraying.
Drying times

(100 - 120 g/m2)

20 ºC

50 ºC

Dry to sand, after

1 h

30 min

Dry to handle, after

4 h

3 h

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 42 volume-%, 53 weight-%
Density 1.2 kg/l
Product code A-base, 787 6001, C-base, 787 6003

Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over +18ºC and the relative humidity of the air below 70%.
Preparation Clean surface from possible dirt, dust and loose material.
Priming Pinja Flex Primer, Pinja Flex Isolator and Pinja Flex 30.
Painting For airless spraying recommended nozzle tip is 0.011”–0.015" and pressure 80–160. Spray angle shall be chosen according to the shape of the object.

For air-assisted airless spraying recommended nozzle tip is 0.011”–0.015" and pressure 40–120 bar. Spray angle shall be chosen according to the shape of the object.
Mixing of components Stir the paint carefully before use. Avoid flotation. Product is delivered in application viscosity.
Cleaning of tools Water
EU VOC 2004/42/EC-limit value VOC content of the" Pinja Flex 30" is 65±10 g/l. According to VOC Directive 2004/42/EU the product subcategory A/d VOC limit (1.1.2010) is maximum 130 g/l.

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional and industrial use only.
Safety data sheetPinja Flex 30


Counter for wood finishes

Tikkurila offers wide range of paint and lacquer systems for different wood industries. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for wood finishes

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.