PRODUCT DATA SHEET
Temalac SC-F 20 - Alkyd paint
|DESCRIPTION||A high-solids alkyd paint, containing anti-corrosive pigments.|
|Recommended uses||Recommended for steel framework, service platforms and different types of machinery and equipment.|
|Features||Recommended as a single coat system for steel surfaces both indoors and outdoors. Good application properties. High film build.
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA, SYMPHONY, TEMASPEED Tinting|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Application method||By airless or conventional spray.
|Solids volume||61 ± 2 %. (ISO 3233)
76 ± 2 %.
|Density||1.5 kg / l depending on colour.|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +5ºC during application or drying. Relative humidity should not exceed 80%. The surface temperature of the steel should remain at least 3ºC above the dew point.|
|Preparation||Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1). If blast cleaning is not possible, use phosphating on cold rolled steel.
Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
|Priming||Temalac SC-F 20|
|Finishing||Temalac SC-F 20|
|Painting||By airless or conventional spray. Mix the paint thoroughly before use.
At airless spray application the paint should be thinned 0 - 5% and at conventional spray application 5 - 10%. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 180 - 240 bar. Spray angle shall be chosen according to the shape of the object. In order to reach thicker coats use "wet-on-wet" technique.
|Cleaning of tools||Thinner 1006.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 360 g/litre of paint.
VOC content in ready to use paint (thinned 10 % by volume) is 410 g/l.
For industrial and professional use only.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.|
|Safety data sheet||Temalac SC-F 20|
|Thinner safety data sheet||Temalac SC-F 20|