PRODUCT DATA SHEET
Temacoat GPL-S MIO - Epoxy paint
|DESCRIPTION||A two-component, polyamide-cured epoxy paint pigmented with micaceous iron oxide.|
|PRODUCT FEATURES||Used as an intermediate or finishing coat in epoxy and polyurethane systems exposed to severe weathering and splashes.|
|Recommended uses||Recommended for bridges, exteriors of tanks, steel frameworks, conveyors, tubular bridges and other steel structures and equipment.|
|Features||Forms a very strong and durable coat due to the micaceous iron oxide pigment. Rapidly recoatable. Can be overcoated after prolonged period.
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Mixing ratio||Base 4 parts by volume 008 7520
Hardener 1 part by volume 008 5600 or 008 5605 (fast)
|Application method||By airless spray or brush.|
|Pot-life (+23°C)||6 hours with Hardener 008 5600
3 hours with Hardener 008 5605
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||60 ± 2 % volume (ISO 3233)
78 ± 2 % weight
|Density||1.5 kg / l (mixed)|
|Product code||008 7520|
|Application conditions||All surfaces must be clean and dry and free from contamination. The temperature of the substrate should be minimum 0 °C and at least 3 ° C above the dew point of the air. The product should not be applied at temperatures below 0 °C where there is a possibility of ice formation on the substrate. The temperature of paint itself should be above + 15 °C for proper application. Good ventilation is required in confined areas during application and drying.
Note! There is a natural tendency of epoxy coatings to chalk and discolor on exterior exposure
|Preparation||Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)|
|Priming||TEMAZINC 77, TEMAZINC 88, TEMAZINC 99, TEMACOAT GPL-S PRIMER, TEMASIL 90 and TEMABOND.|
|Finishing||TEMACOAT GPL, TEMACOAT GS 50, TEMACOAT RM 40, TEMADUR 20, TEMADUR 50, TEMADUR 90, TEMADUR HB 50, TEMADUR HB 80, TEMATHANE 50 and TEMATHANE 90.|
|Painting||By airless spray or brush. At spray application the paint should be thinned 0 - 10 %. Airless spray nozzle tip 0.015" - 0.021" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. At brush application the paint should be thinned according to the circumstancies.|
|Mixing of components||First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use mechanical mixer for mixing.|
|Cleaning of tools||Thinner 1031.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 340 g/litre of paint.
VOC content of paint mixture (thinned 10 % by volume) is 400 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.|
|Safety data sheet||Temacoat GPL-S MIO|
|Thinner safety data sheet||Temacoat GPL-S MIO|
|Hardener safety data sheet||Temacoat GPL-S MIO|