PRODUCT DATA SHEET
Temadur 90 - Polyurethane paint
|DESCRIPTION||A two-component, glossy polyurethane paint, hardener aliphatic isocyanate.|
|PRODUCT FEATURES||Recommended as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress.|
|Recommended uses||Recommended for painting of transport and haulage equipment, storage tank exteriors, steel framework and other steel structures, machinery and equipment. When used in interior wooden surfaces, please see “Application instructions Temadur 90 with hardener 008 7596”. Hardener 008 7594 is recommended to be used in hot and humid conditions.|
|Features||Excellent weathering and abrasion resistance. A durable, easy-to-clean and non-chalking topcoat with good gloss and color retention.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. Temaspeed tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1048, 1067 and 1061|
|Mixing ratio||Base 5 parts by volume 115-series
Hardener 1 part by volume 008 7590 or 008 7594
|Application method||By airless or conventional spray or by brush.|
|Pot-life (+23°C)||4 hours|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||55 ± 2 volume % (ISO 3233)
68 ± 2 weight %
|Density||1.2 ± 0.1 kg / l (mixed)|
|Product code||Base paint 115-series, hardeners 008 7590, 008 7594 or 008 7596|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.|
|Preparation||Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)|
|Priming||Temacoat GPL-S Primer, Temacoat GF Primer, Temacoat PM Primer, Temacoat GPL-S MIO, Temacoat RM 40, Temacoat SPA, Temamastic PM 100, Temabond, Temadur 20, Temadur Primer, Temaprime GF and Fontecryl 10.|
|Finishing||Temadur and Temathane.|
|Painting||By airless or conventional spray or by brush. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5 - 30 minutes and then apply the full coat. Depending on the temperature of the components (base, hardener, thinner) the paint can be thinned 10 - 22 %. The viscosity should be 20 - 25 s DIN4. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object. At brush application the paint should be thinned according to the circumstancies.|
|Mixing of components||First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use mechanical mixer for mixing.|
|Cleaning of tools||Thinner 1048, 1067 or 1061.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 420 g/litre of paint mixture.
VOC content of the paint mixture (thinned 22 % by volume) is 495 g/l.
Only for industrial use.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.|
|Safety data sheet||Temadur 90|
|Thinner safety data sheet||Temadur 90|
|Hardener safety data sheet||Temadur 90|