PRODUCT DATA SHEET
22.02.2010

Temal 400 - Silicone paint

 
Temal 400
DESCRIPTION A heat-resistant silicone paint.
PRODUCT FEATURES Recommended for exteriors of steel structures exposed to high temperatures.
Recommended uses Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces indoors and outdoors.

TECHNICAL DATA
Features Resistant to temperatures up to + 400 ºC dry heat on steel surfaces.
Colour Range Black.
Gloss groups Matt
Coverage

Recommended film thicknesses

Theoretical coverage

dry

wet

 

15 µm

75 µm

12,7 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1031
Application method By airless spray (airmix system is recommended) or conventional spray or by brush.
Drying times

DFT 15 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

5 min

Touch dry, after

1 h

30 min

15 min

Recoatable, after

3 h

2 h

1 h

Final cure and hardness will be obtained by curing at +230 ºC, 1 h.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 19 ± 2 % volume (ISO 3233)
34 ± 2 % weight
Density 1.1 kg / l
Product code 006 7683

APPLICATION DETAILS
Application conditions All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 10 ºC during application. Relative humidity should not exceed 80 %. The surface temperature of steel should remain at least 3 ºC above the dew point.
Preparation Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Temasil 90.
Finishing Temal.
Painting By airless spray (airmix system is recommended) or conventional spray or by brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 10 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Cleaning of tools Thinner 1031.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 700 g/litre of paint.
VOC of the paint (thinned 10 % by volume) is 715 g/l.
For industrial and professional use only.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTemal 400
Thinner safety data sheetTemal 400
 
-


Back