PRODUCT DATA SHEET
17.05.2013

Temalac ML 90 - Alkyd topcoat

 
Temalac ML 90
DESCRIPTION A high-gloss, one-component alkyd topcoat.
PRODUCT FEATURES High gloss alkyd topcoat for steel surfaces. Can be applied using a "wet-on-wet" painting technique. Suitable for industrial finishing.
Recommended uses Recommended uses: small tanks, agricultural machinery, haulage equipment and other machinery and equipment.

TECHNICAL DATA
Features Good gloss and colour retention when exposed to weathering.
Colour Cards RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.
Gloss groups Full-gloss
Coverage

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40 µm

90 µm

11.2 m2/l

60 µm

135 µm

7.5 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1006 and 1050
Application method By airless or conventional spray or by brush.
Drying times

DFT 40 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

2 h

1 h

½ h

Touch dry, after

8 h

5 h

3 h

Recoatable, after

36 h

24 h

16 h

Recoatable, "wet-on-wet", after

 

½ - 1 h

 

Touch dry 1 h / 60 ºC, ½ h / 80 ºC

 

 

 


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 45 ± 2 volume % (ISO 3233)
57 ± 2 weight %
Density 0.9 - 1.1 kg / l depending on colour.
Product code 513-series

APPLICATION DETAILS
Application conditions All surfaces must be dry. The temperature of the ambient air, surface and paint should not fall below + 5ºC during application and drying. Relative humidity should not exceed 80%. The temperature of the substrate should remain at least 3ºC above the dew point.
Preparation Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Temaprime EE, Temaprime EUR, Temaprime GF, Temaprime ML and Fontecryl 10.
Finishing Temalac ML 90.
Painting By airless spray or by brush. Mix the paint thoroughly before use. At airless spray the paint should be thinned 0 - 10%. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 140 - 180 bar. Spray angle shall be chosen according to the shape of the object. The best finish is obtained using a "wet-on-wet" technique, with 5 - 30 minutes evaporating pauses.
Cleaning of tools Thinner 1006 or Thinner 1050.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 460 g/litre of paint.
VOC content of the paint (thinned 10 % by volume) is 500 g/l.
Only for industrial and professional use.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTEMALAC ML 90 [GB-ENG]
Thinner safety data sheetTemalac ML 90
 
-


Back