PRODUCT DATA SHEET
20.12.2012

Diccoplast 30 Tix - Acid-catalyzed topcoat

 
Diccoplast 30 TIX
DESCRIPTION A two-component acid-catalyzed topcoat.
PRODUCT FEATURES

A fast drying, durable paint with good filling properties for indoor use.

Thixotropic paint with good hiding properties.

 

Recommended uses Recommended for furniture, doors and other wooden and fibre board surfaces.

TECHNICAL DATA
Colour Cards RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards.

TEMASPEED PREMIUM tinting.
Gloss groups Semi-matt
Emission classification Emission levels of this paint fulfils the E1-classification. Paint has been tested according to EN 717-1, and formaldehyde emission is less than 0.124 mg/m3 air.
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

40–50 µm

100–120 g/m2

11–13 m2/l

Thinner 1027 and 1033
Mixing ratio Paint 100 parts by volume 655 serie
Hardener 10 parts by volume 006 2098
Application method

Airless spraying, air-assisted airless spraying and conventional spraying.

 

Application (+23 °C)

For airless spraying, the product is thinned approximately 10–20% to the viscosity

25–50s (DIN 4). Nozzle tip 0.011"–0.015" and nozzle pressure 80–140 bar. Spray angle shall be chosen according to the shape of the object.

 

For air assisted airless spraying, the product is thinned approximately 10–20% to the viscosity 25–50s (DIN 4). Nozzle tip 0.011"–0.015" and nozzle pressure 40–120 bar. Atomising air pressure should be about 1-3 bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying, the product is thinned approximately 10–20% to the viscosity 20–25s (DIN 4). Nozzle tip 1.4–1.8 mm and the nozzle pressure 2–3 bar.

Pot-life (+23°C) 48 hours.
Drying times

100120 g/m²

+23ºC

+50ºC

Dry to touch, after

2030 min

1020 min

Dry to stack, after

46 h

4060 min

Dry to pack, after

1d

23 h

 

 

Stacking temperature below +35 ºC.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 52±2% by volume
68±2% by weight
Density 1.3 kg/litre
Product code 655 serie

APPLICATION DETAILS
Application conditions The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over +18ºC and the relative humidity of the air below 70%.
Preparation Wood surfaces must be sanded with sanding paper P150-240. Sanding between primer and top coat can be done with sanding paper P240-400. All sanding dust must be removed before painting.
Priming Recommended primers:
Diccoplast Primer and Diccoplast Plus Tix.
Painting Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098 and mix again carefully. Thin the paint to the viscosity required with Thinner 1027 or 1033.

Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
Mixing of components Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098 and mix again carefully. Thin the paint to the viscosity required with Thinner 1027 or 1033.
Cleaning of tools Thinner 1027 or 1033.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 400 g/litre of paint mixture.
VOC content of the paint mixture (thinned 20 % by volume) is 480 g/l.
VOC 2004/42/EC (catA/j) 500 g/l (2010).

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetDiccoplast 30 Tix
Thinner safety data sheetDiccoplast 30 Tix
Hardener safety data sheetDiccoplast 30 Tix
 
-


Back