Akvilac FD-J 25 - Acrylate lacquer

Akvilac FD J 25
DESCRIPTION A water-borne, one-component acrylate lacquer.

A very fast drying and economical all-round lacquer for interior use.

The lacquer film is transparent and it can be used on top of dark stain colours.

Excellent blocking and chemical resistance.

Can also be used as a sealer under water-borne UV-lacquer, see page 2.

Recommended uses Suitable for joinery industry such as mouldings, panels, doors and other wooden surfaces. Especially suitable for fast production lines.

Colour Range Temaspeed Akvi Tone -tinting.
Colour Cards Shades from the Akvicolor AT colour cards and several colours by request.
Gloss groups Semi-matt

Recommended spreading amounts (unthinned)

Theoretical coverage




16–23 µm

70–100 g/m²

10–15 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner Water
Application method

Air-assisted airless spraying and conventional spraying.


For air-assisted airless spraying, the product is thinned approximately 0–5% to the viscosity 40–60s (DIN4). Recommended nozzle tip is 0.009"0.013" and  pressure 40–120 bar. Atomising air pressure should be about 1–3  bar. Spray angle shall be chosen according to the shape of the object.


For conventional spraying, the product is thinned approximately 0–5% to the viscosity 40–60s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and  pressure 2–3 bar.

Drying times

100 g/m²  wet film

+23 ºC


Dust dry, after

20–25 min

5–10 min

Touch dry, after

25–30 min

5–10 min

Dry to sand, after

30–35 min

5–10 min

Drying and recoating times are related to the film thickness, temperature, the relative, humidity of the air and ventilation.


Solids volume Volume solids 23±2%
Weight solids 25±2%
Density 1.0 kg/litre
Product code 483 6909 (TCW-base)

Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over +18ºC and the relative humidity of the air below 70%.
Preparation Wood surfaces should be sanded with sandpaper P150–240. Primer surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed before lacquering.
Priming Recommended primer Akvilac FD-J 25.
Surface treatment Recommended topcoats: Akvilac FD-J 25 and Luminol Clear 25.
Mixing of components Stir the lacquer carefully before use. Avoid flotation. Thin with water to the viscosity required.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 21 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5 % by volume) is 20g/l.
VOC 2004/42/EC (cat A/e) 130g/l (2010)

according to Regulation (EC) No. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetAkvilac FD-J 25