Pinja Color Plus - Water-borne stain

Pinja Color Plus
DESCRIPTION A water-borne tintable semi-transparent wood stain. The binder of the product is an acrylate.

Protects the surface against moisture, sunlight and dirt. Decreases cracking of wood surface.

“Super Colors” color card with intensive and warm, ablazing transparent colors.

Recommended uses Recommended for timber cladding, window frames, front doors, fencing and other wooden surfaces outdoors. Suitable for planed and sawn wood surfaces and for impregnated and thermally modified wood. Suitable also for lamelled logs.

Features Provide remarkably longer maintenance interval.
A flexible exterior wood stain, which forms semi-transparent film.

Colour Cards All the shades from the Super Color and Valtti color cards.
Avatint tinting system. Always use a tinted product. Note that whitish colors are not recommended for woods that have resin-bleeding tendency (for instance oak). Wood resin can change the original shade.
Gloss groups Semi-matt

Recommended spreading amounts (unthinned)

Theoretical coverage




 2 x 90–120 g/m2

2 x 30–40 µm

4–5 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner Water
Application method Airless spraying and air-assisted airless spraying.
Drying times

90–120 g/m2




2-4 h

10–30 min

Stacking temperature of the painted object below +30ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 28±2% by volume
30±2% by weight
Density 1.0 kg /litre (clear)
Product code 75V-series

Application conditions The surface to be treated has to be clean and dry. The moisture content of wood has to be below 20%. During application and drying temperature of the air, substrate and paint must be over +5°C and relative humidity of the air below 80%. Good ventilation is required to ensure optimal result. Product can be dried with or without oven.
Preparation Clean surfaces from dirt, dust and loose material. Assure that surface is free from mould and blue stain.
Priming Pinja Wood Stain.
Diluting Paint is recommended to be used without thinning. If needed thin with water max. 5%.
Staining Stir the product carefully before use. The product is ready for use.

For airless spraying, recommended nozzle tip is 0.009"–0.011" and pressure 80-160 bar. Spray angle shall be chosen according to the shape of the object.

For air-assisted airless spraying, recommended nozzle tip is 0.009"–0.011" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

Wood contains resin and other colouring extractives especially in knots. Temperature and humidity fluctuations may cause paint coat discolouration in these areas.
Cleaning of tools Water or Tikkurila Tool Cleaner.
EU VOC 2004/42/EC-limit value Maximum VOC content in ready to use mixture is 20 g/l.

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetPINJA COLOR PLUS