PRODUCT DATA SHEET
04.12.2014

Akvi Primer J - Acrylate primer

 
Akvi Primer J
DESCRIPTION Water-borne acrylate primer.
PRODUCT FEATURES

Suitable for furniture, doors, mouldings and other wooden surface in interior premises.

 

 

Recommended uses -

TECHNICAL DATA
Features A fast drying primer with good sanding properties.
Can be overcoated both with water- and solvent-borne products.
Colour Range White
Gloss groups Matt
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

25–35 µm

100–150 g/m²

10–14  m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner Water
Application method

Airless spraying, air-assisted airless spraying and conventional spraying.

 

For airless spraying the product is thinned approximately 0–5% to the viscosity 50–80s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 100–160 bar. Spray angle shall be chosen according to the shape of the object.

 

For air-assisted airless spraying, the product is thinned approximately 0–5% to the viscosity 50–80s (DIN4). Recommended nozzle tip is 0.011"–0.015" and  pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying the product is thinned approximately 0–5% to the viscosity 50–80s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and  pressure 2-3 bar.

Drying times

120130 g/m2  wet paint

+23ºC

+50ºC

Dry to dust, after

20 min

5–10 min

Dry to sand, after

60 min

15 min

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume 34±2% by volume
52±2% by weight
Density 1.4 kg/litre.
Product code 006 5032

APPLICATION DETAILS
Application conditions Substrate must be clean and dry before painting. During application and drying the temperature of the air, substrate and the paint must be over +18ºC and the relative humidity of the air must be below 70%.
Preparation Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed.
Painting Recommended topcoats:
Akvi Top 30, Diccoplast 30 and Luminol 25 N.
Mixing of components Stir the paint carefully. Thin the paint to the viscosity required.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 87 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5 % by volume) is 77 g/l.
VOC 2004/42/EC (cat A/d ) 130 g/l (2010)

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetAkvi Primer J
 
-


Back