Akvilac FD 25 - Acrylate lacquer

Akvilac FD25
DESCRIPTION A water-borne, one-component acrylate lacquer.

A very fast drying all-round lacquer for interior use. The lacquer film is transparent and it could be used on the top of dark stain colours. Excellent blocking and chemical resistance.

Recommended uses Suitable for furniture, panels, doors and other wooden surfaces. Especially suitable for fast production lines.

Colour Range Temaspeed Akvi Tone -tinting.
Colour Cards Shades from the Akvicolor AT colour cards and several colours by request.
Gloss groups Semi-matt

Recommended spreading amounts (unthinned)

Theoretical coverage




20–29 µm

70–100 g/m²

10–15 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner Water
Application method

Air-assisted airless spraying and conventional spraying.


Application (+23 °C)

For air-assisted airless spraying, the product is thinned approximately 0-5% to the viscosity 45-65s (DIN4). Recommended nozzle tip is 0.009"–0.013" and  pressure 40-120 bar. Atomising air pressure should be about 1–3  bar. Spray angle shall be chosen according to the shape of the object.


For conventional spraying, the product is thinned approximately 0–5% to the viscosity 45-60s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and  pressure 2-3 bar.

Drying times

100 g/m²  wet film

+23 ºC

+ 50 ºC

Dust dry, after

2025 min

510 min

Touch dry, after

2530 min

510 min

Dry to sand, after

3035 min

510 min


Drying and recoating times are related to the film thickness, temperature, the relative, humidity of the air and ventilation.


Solids volume Volume solids 29±2%
Weight solids 31±2%
Density 1.0 kg/litre
Product code 447 6909 (TCW-base)

Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over +18ºC and the relative humidity of the air below 70%.
Preparation Wood surfaces should be sanded with sandpaper P150–240. Primer surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed before lacquering.
Priming Recommended primers: Akvilac 25 FD.
Apply lacquer 1–2 times.
Mixing of components Stir the lacquer carefully before use. Avoid flotation. Thin with water to the viscosity required.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 16 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5 % by volume) is 15g/l.
VOC 2004/42/EC (cat A/e) 130g/l (2010)

according to Regulation (EC) No. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetAkvilac FD 25