PRODUCT DATA SHEET
25.11.2014

Akvilac FD 70 - Acrylate lacquer

 
Akvilac FD 70
DESCRIPTION Water-borne, one-component acrylate lacquer.
PRODUCT FEATURES

A very fast-drying, high-gloss lacquer lacquer for interior use.

Recommended uses Suitable for furniture, panels, doors and other wooden surfaces. Especially suitable for fast production lines.

TECHNICAL DATA
Features • The lacquer film is transparent and it can be used on top of dark stain colors.
• Excellent blocking resistance.
Colour Range Temaspeed Akvi Tone -tinting.
Colour Cards Shades from the Akvicolor AT color cards and several colors by request.
Gloss groups Gloss
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

 

23–33 µm

70–100 g/m²

10–14 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner Water
Application method

For air-assisted airless spraying, the product is thinned approximately 0–5% to the viscosity 45–65s (DIN4). Recommended nozzle tip is 0.009"–0.013" and  pressure 40–120 bar. Atomising air pressure should be about 1–3  bar. Spray angle shall be chosen according to the shape of the object.

 

For conventional spraying, the product is thinned approximately 0–5% to the viscosity 45–60s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and  pressure 2–3 bar.
Drying times

100 g/m2 wet film

+23ºC

+ 50ºC

Dust dry, after

20–25 min

5 - 10 min

Touch dry, after

25–30 min

5 - 10 min

Dry to sand, after

30–35 min

5 - 10 min

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume abt. 33±2 % by volume, 35±2 % by weight.
Density 1.0 kg/litre
Product code 55V 6909

APPLICATION DETAILS
Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18ºC and the relative humidity of the air below 70%.
Preparation Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed before lacquering.
Priming Recommended primers: Akvilac FD 70. Apply lacquer 1-2 times.
Lacquering Stir the lacquer carefully before use. Avoid flotation. Thin with water to the required viscosity.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 23 g/l of lacquer mixture.
VOC content of the paint mixture (thinned 5 % by volume) is 21 g/l.
VOC 2004/42/EC (cat A/e ) 130 g/l (2010)

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetAKVILAC FD 70
 
-


Back