Colowood - Water-borne filler

DESCRIPTION Water-borne filler for wooden surfaces.
PRODUCT FEATURES For filling holes in interior wooden surfaces such as fibre boards, solid wood or veneer.
Recommended uses Recommended for furniture, doors, panel walls and ceilings.

Colour Range Birch, birch knot, pine, pine knot, oak, oak knot, beech, white, mahogany and black.
Gloss groups Matt

Practical coverage depends on the application method, conditions and the shape and roughness of the surface to be treated.

Thinner Water
Application method By spatula.
Drying times

Thin filling layer can be sanded after 4 hours and deeper filling layer after 24 hours.

Solids volume Abt. 64±2 % by volume, 82±2 % by weight.
Density 2,0 ± 0,2 kg/ kg/litre
Product code 007 2074, 007 2075, 007 2076, 007 2077, 007 2078, 007 2079, 007 2080, 007 2081, 007 2083, 007 2209.

Application conditions The surface to be treated must be dry, the temperature of the air at least +5ºC and the relative humidity of the air below 80%.
Preparation Remove dirt from the surface. Brush away dust and loose material.

Application Apply with a spatula. Thin with water, if necessary. Fill large holes preferably twice or several times. Sand the surface and remove sanding dust.
Surface treatment Can be recoated with Tikkurila's water-borne, water-borne UV and solvent-borne products.
Mixing of components Thin filler to the viscosity required.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 22 g/litre of putty.
VOC content of the putty (thinned 10 % by volume) is 20 g/l.

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetColowood