PRODUCT DATA SHEET
Diccodur Primer - Polyurethane primer
|DESCRIPTION||A two-component polyurethane primer.|
A fast-drying, easy to sand and flexible primer for interior and exterior use.
|Recommended uses||Recommended for exterior wooden windows, doors and exterior quality wooden and fiber board surfaces. Also recommended for interior furniture, chairs, doors and wooden and fibre board surfaces.|
|Colour Range||White. The colours of TCL base paints.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED PREMIUM tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated
|Mixing ratio||Paint 100 parts by volume 007 1580 (white) or 689 7223 (TCL base)
Hardener 20 parts by volume 007 1255
Airless, air assisted airless and conventional sraying or curtain coating.
Airless application with the viscosity 25–50s (DIN 4) can be reached with approximately 5–20 % of thinning. Nozzle tip 0.011"–0.015" and the nozzle pressure 80–140 bar. Spray angle shall be chosen according to the shape of the object.
Air assisted airless application with the viscosity 25–50s (DIN 4) can be reached with approximately 5–20 % of thinning. Nozzle tip 0.011"–0.015" and the nozzle pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
Conventional application with the viscosity 20–25s (DIN 4) can be reached with approximately 10–20 % thinning. Nozzle tip 1.4–1.8 mm and the nozzle pressure
2–3 bar. Spray angle shall be chosen according to the shape of the object.
|Pot-life (+23°C)||6 hours.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||44±2% by volume
64±2% by weight
|Density||1.4 kg/litre (white), 1,3 kg/litre (TCL base paint)|
|Product code||Paint 007 1580 (white) or 689 7223 (TCL base), hardener 007 1255|
|Application conditions||The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the primer has to be over 18 ºC and the relative humidity of the air below 70 %.|
|Preparation||Wood material must be sanded with sanding paper P150–240. Sanding between primer and top coat can be done with sanding paper P240–400. All sanding dust must be removed before painting.|
|Painting||Dicco Flex (exterior), Novipur 30 and 100 (interior).|
|Mixing of components||Stir the paint carefully. Add 20 % by volume Hardener 007 1255 and mix again carefully. Thin the paint to the viscosity required.
Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 500 g/litre of paint.
VOC content of the paint mixture (thinned 20 % by volume) is 550 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial use only.|
|Safety data sheet||Diccodur Primer|
|Thinner safety data sheet||Diccodur Primer|
|Hardener safety data sheet||Diccodur Primer|