PRODUCT DATA SHEET
03.02.2016

Pinja Flex Combi 25 - Water-borne topcoat - NEW!

 
Tikkurila Industry 9L
DESCRIPTION A one-component water-borne polyacrylate topcoat.
PRODUCT FEATURES

Can be used as a primer and/or a topcoat.

Recommended uses Suitable for wooden window frames and front doors.

TECHNICAL DATA
Features Forms a fast-drying and elastic film with low water permeability properties.
Protects the surface against moisture and sunlight.
Gloss groups Semi-matt
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

wet

dry

 

 155 g/m2

50µm

8–9 m2/l

       

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Application method Airless spraying and air-assisted airless spraying.
Drying times

100–120 g/m2

+20ºC

+50ºC

Dry to sand, after

1h

½ h

Dry to handle, after

2h

1h


Stacking temperature below +30°C.

Drying and recoating times are related to the colour shade, film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 39% volume (A base)
50% weight (A base)
Density 1.2 kg/litre.
Product code 38V 6001 (A base )

APPLICATION DETAILS
Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over +18ºC and the relative humidity of the air below 70%.
Preparation Clean surface from possible dirt, dust and loose material.
Priming Recommended primers: Pinjadur Primer, Pinja Flex Combi 25, Pinja Flex Isolator and Pinja Flex Primer.
Painting For airless spraying recommended nozzle tip is 0.011”–0.015" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object.

For air-assisted airless spraying recommended nozzle tip is 0.011”–0.015" and pressure 40–120 bar. Spray angle shall be chosen according to the shape of the object.
Mixing of components Stir the paint carefully before use. Avoid flotation. Product is delivered in application viscosity.
Cleaning of tools Water or Tikkurila Tool Cleaner.
EU VOC 2004/42/EC-limit value According to VOC Directive 2004/42/EU the product subcategory A/d VOC limit (1.1.2010) is maximum 130 g/l. VOC content of the "Pinja Flex Combi 25" is 30±10 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional and industrial use only. If you have any questions about this product, please go to web site www.tikkurila.com or send an e-mail to info.coatings@tikkurila.com.
Safety data sheetPINJA FLEX COMBI 25
 
-


Back