PRODUCT DATA SHEET
28.02.2014

Pinja Pro - Acrylate paint

 
Pinja Pro
DESCRIPTION A water-borne acrylate exterior paint.
PRODUCT FEATURES

Good protection against weathering.

Protects the surface against moisture, sunlight and dirt.

Recommended uses Suitable for exterior wooden panels and claddings.

TECHNICAL DATA
Colour Cards Avatint tinting. For exterior use it is recommended to use the shades on the House Paint colour card.
Gloss groups Matt
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

wet

dry

 

120–160 g/m²

35–50µm

8–10 m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner Water
Application method

Application  (+23ºC)

 

Airless spraying, air-assisted airless spraying, conventional spraying and brushing.

 


Drying times

 120–160 g/m²

+23ºC

+50ºC

Recoatable, after

2–4h

1–2h

Note! Dark shades made from C base will dry slower.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume abt. 40 volume-% (A-base)
abt. 37 volume-% (C-base)

abt. 52 weight-% (A-base)
abt. 44 weight-% (C-base)
Density 1.3 kg / litre (A-base), 1.2 kg / litre (C-base)
Product code 244-series

APPLICATION DETAILS
Application conditions The surface to be treated has to be clean and dry. The moisture content of wood has to
be below 20%. During application and drying temperature of the air, substrate and paint
must be over +18°C and relative humidity of the air below 70%. Good ventilation is
required to ensure optimal result. Product can be dried with or without oven.
Preparation Clean surfaces from dirt, dust and loose material. Assure that surface is free from
mould and blue stain.
Priming Recommended primers: Pinja Pro Primer, Pinja Universal Primer and Pinja Pro.

On planed wood Pinja Pro is recommended to be applied without any separate primer.
The paint system is 120 g/m2 applied in 2 layers.
Painting Stir the product carefully before use. Avoid making foam.

For airless spraying the product is thinned approximately 0–10%. Recommended nozzle tip is 0.013"–0.015" and pressure 120–180 bar. Spray angle shall be chosen according to the shape of the object.

For air-assisted airless spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 0.013"–0.015" and pressure 40–140 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

For conventional spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 1.6–2.0 mm and pressure 2–3 bar.

Wood contains resin and other colouring extractives especially in knots. Temperature and humidity fluctuations may cause paint coat discolouration in these areas.
Mixing of components Stir the paint carefully before use. Avoid flotation.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 20 g/litre of paint.


HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetPinja Pro
 
-


Back