PRODUCT DATA SHEET
Temasolid SC-F 80 - Polyurea paint
|DESCRIPTION||A two component gloss polyurea paint, containing anticorrosive pigments, hardener aliphatic isocyanate.|
Recommended to be used especially as a single coat finish for agricultural and earth moving machinery and other machinery and equipment. Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking paint with exellent gloss and colour retention.
|Recommended uses||Agricultural and earth moving machinery and other machinery and equipment.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA, SYMPHONY, TEMASPEED Tinting|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1048 and 1067|
|Mixing ratio||Base 2 parts by volume 578-s
Hardener 1 part by volume 008 7710
By airless or conventional spray.
|Pot-life (+23°C)||½ hour.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||80 ± 2 %.
87 ± 2 %.
|Density||1.4 ± 0.1 kg / l (mixed).|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +5ºC during application or drying. The surface temperature of the steel should remain at least 3ºC above the dew point.|
|Preparation||Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is necessary for cold rolled steel to improve adhesion.
Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
|Priming||Fontecryl AP, Fontecoat EP Primer, Temanyl PVB, Temadur HS Primer,Temacoat GPL-S Primer, Temacoat SPA Primer, Temazinc 77/88/99.|
|Painting||By airless or conventional spray.
Airless spray: depending on the temperature of the components and shape of the object the paint can be thinned 0 - 10 %. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 160 - 200 bar. Spray angle shall be chosen according to the shape of the object.
At conventional spray the paint should be thinned 5 - 15 %, nozzle pressure 2,5 bar, nozzle tip 1,6-1,8 mm.
|Mixing of components||First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.|
|Cleaning of tools||Thinner 006 1048 or Thinner 006 1067.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 170 g/litre of paint mixture.
VOC content of the paint mixture (thinned 15 % by volume) is 270 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.|
|Safety data sheet||Temasolid SC-F 80|
|Thinner safety data sheet||Temasolid SC-F 80|
|Hardener safety data sheet||Temasolid SC-F 80|