Working instructions
Product data sheet
Paint calculator
Safety Data Sheets

Temafloor P 300

A two-component, solvent-free, self-leveling epoxy coating. This excellent high-glossy paint is for treating of new and old concrete floors in industrial facilities, also in commercial and public premises.

The paint is suitable for interior floorsTool: rollerTyöväline: teräslasta
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces

Durable epoxy coating

Temafloor P 300 withstands heavy mechanical and chemical stress in industrial, commercial and storage facilities, repair shops, etc.  

Thousands of colors including metallic shades

Temafloor P 300 can be tinted in different color shades, including metallic, e.g. according to RAL Effect collection due to  aluminium pigmented base paint. 

Seamless and manageable

Temafloor P 300 is a self-leveling coating, that can be applied with an adjustable steel trowel. 
Using an imagination and different techniques creating of individual and colourful Design floors is now also possible. 

Temafloor P300 is widely used for


Temafloor P 300 - Solvent-free epoxy coating

Temafloor P300
DESCRIPTION A two-component, solvent-free epoxy coating.
PRODUCT FEATURES For new and old concrete floors exposed to heavy mechanical and chemical stress in industrial and storage facilities, repair shops; e.g. process or paper machine units and corridors.
Recommended uses Also suitable for car parks, garages, business premises, shopping centres, restaurants and cafe`s.

Features Good resistance to abrasion. Withstands water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions. Resists only temporary splashes of oxidizing acids and bleaching chemicals. A separate chemical resistance table available. Withstands +70ºC dry heat and +60ºC in immersion. Does not resist abrupt, great or repeated changes of temperature. Self-levelling. Temafloor Flex hardener makes the paint surface flexible and thus more resistant to cracking of concrete. Also RAL EFFECT metallic colour shades available. Fire classification: Fire classification according to standard EN 13501-1 is BFL-s1.
Colour Cards RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. Also metallic shades are available.
Gloss groups Full-gloss

Coverage on concrete floors is on the average:

Film thickness 0.3 mm coverage approx. 3 m2/litre

Film thickness 0.5 mm coverage approx. 2 m2/litre


Practical coverage depends on the porosity and evenness of the substrate and on the application method.
Mixing ratio Base 4 parts by volume 167 serie
Hardener 1 part by volume 008 4514


Paint 2 parts by volume 167 serie
Flex hardener 1 part by volume 930 5002
Application method Pour the coating mixture onto the floor and spread it with a serrated steel trowel or a trowel. Level with a roller.
Pot-life (+23°C) 20 - 30 minutes on substrate, approx. 15 minutes in the mixing container.
Drying time at 23°C and 50% relative air humidity

Dust dry after 6 hours

Light trucking after 16 hours

Fully cured after 7 days


At lower temperature the curing process will last longer.

With Temafloor Flex hardener the curing times are a little longer than with standard hardener.
Solids volume Approx. 100 %.
Density 1.4 kg / litre (mixture)
Product code 167 serie

Application conditions The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below + 15ºC during application or drying. Relative humidity of air should not exceed 80%.

Note! There is a natural tendency of epoxy coatings to chalk and discolor on exterior exposure.
Preparation New concrete
Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid
(1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor.

Old concrete
Remove all grease, oil, chemicals and other impurities by MAALIPESU detergent. Remove old peeling paint layer by grinding or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust.

Cementitious levelling screed
Check compatibility with the levelling screed manufacturer.
Priming Prime using 30–50% with Thinner 1029 (or 1031) thinned Temafloor 200 Primer or 400 epoxy varnish. Pour the varnish mixture onto the floor and apply as much as is needed to impregnate the concrete surface. If necessary, repeat priming to get a non-porous surface. Subsequent treatment can be carried out after 2 hours using "wet-on-wet" technique. A porous priming coat will result in holes and air bubbles in the finished screed.
Patching Patch pot-holes and cracks with Colofill putty or a mixture of unthinned Temafloor 200 Primer epoxy varnish or Temafloor P 300 epoxy coating and dry, clean sand. Mixing ratio e.g. 1 part by volume of epoxy mixture and 1–2 parts by volume of sand of grain size 0.1–0.6 mm. Grind the patched areas before overcoating.
Diluting Do not thin Temafloor P 300 epoxy coating.
Coating Overcoating may be carried out with unthinned Temafloor P300 not earlier than 6 hrs and not later than 24 hrs after priming and patching. If the primed surface is not overcoated within 24 hrs, it should be abraded. Pour the coating mixture onto the floor and spread it with a serrated steel trowel or a trowel. Level with a roller. Recommended film thickness is 0.3–0.5 mm.
Mixing of components Mix the correct proportions of base and hardener thoroughly (approx. 2 minutes) by using a low speed hand drill with a paddle. The amount of mixture depends on the area to be coated and on the pot life of the mixture. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface, weaken the properties of the coating and risk the success of the application.
Cleaning of tools Thinner 006 1029 or Thinner 006 1031.
EU VOC 2004/42/EC-limit value VOC 2004/42/EC (cat A/j) 500 g/l (2010)
Temafloor P 300: max. VOC < 500 g/l

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTemafloor P 300
Thinner safety data sheetTemafloor P 300
Hardener safety data sheetTemafloor P 300

DECLARATION OF PERFORMANCE Declaration of Performance EN13813 Declaration of Performance EN1504-2

The European harmonized productstandard EN 13813 defines the requirements for Screed materials and floor screeds, including synthetic resin screeds.
This product is tested and CE-labelled in accordance with the tables ZA.1.5 and ZA.3.3 in the appendix ZA.3.
CE logo
Tikkurila Oyj
Kuninkaalantie 1
EN 13813
Abrasion resistance
Chemical resistance
CR 1, 2, 4…5, 8, 11…14, 15a (Class 2)
Release of corrosive substances
Impact resistance
Sound insulation
Sound absorption
Thermal resistance
Reaction to fire
Water permeability
Adhesion strength by pull off test
B 2.0

The European harmonized productstandard EN 1504-2 defines the requirements for surface protection systems for concrete.
This product is tested and CE-labelled in accordance with the tables 1d, 1f and 1g in the appendix ZA.
CE logo
Tikkurila Oyj
Kuninkaalantie 1
EN 1504-2:2004
Product for protection and repair of concrete structures – Coating
Abrasion resistance
< 3000 mg
Resistance to severe chemical attack
Class II
Permeability to CO2
CO2sD > 50 m
Water absorption
w < 0,1 kg/m²∙h0,5
Impact resistance
Class I: ≥ 4 Nm
Permeability to water vapour
Class II, 5 m < sD < 50 m
Adhesion strength by pull off test
≥ 2,0 N/mm²
Reaction to fire