Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Temathane 50

A two-component, semi-gloss polyurethane paint widely used for painting of outside surfaces of storage tanks and steel structures.

The paint is solvent-borneTool: sprayTool: brush
The coverage of the paint on rough surfaces
9,2
m2/l
The coverage of the paint on smooth surfaces
13,7
m2/l

Forms hard surface with good gloss and color retention

Temathane 50 is a two-component polyurethane paint with good weather and abrasion resistance.

Fast-drying polyurethane paint

Temathane 50 is used as a semi-gloss topcoat for epoxy and polyurethane systems exposed to weathering.


Temathane 50 is widely used for




Paint and coating systems for metal industries


PRODUCT DATA SHEET
04.09.2013

Temathane 50 - Polyurethane paint

 
Temathane 50
DESCRIPTION A two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate.
PRODUCT FEATURES Recommended to be used as a semigloss topcoat for epoxy and polyurethane systems exposed to weathering.
Recommended uses Recommended for painting of outside of storage tanks, steel buildings and other steelwork.

TECHNICAL DATA
Features Excellent weathering and abrasion resistance.
A durable, easy to clean and non-chalking topcoat with good gloss and colour retention.
Colour Cards RAL, NCS, SSG, BS, MONICOLOR NOVA, SYMPHONY, TEMASPEED Tinting
Gloss groups Semi-gloss
Coverage

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40 µm

75 µm

13.7 m2/l

60 µm

110 µm

9.2 m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1048, 1067 and 1061
Mixing ratio Base 9 parts by volume 514-series
Hardener 1 part by volume 008 7620
Pot-life (+23°C) 4 hours.
Drying times

DFT 50 µm

+ 5 ºC

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

45 min

30 min

15 min

10 min

Touch dry, after

8 h

6 h

4 h

2½ h

Recoatable, after

No limitations.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 55±2% volume (ISO 3233)
67±2% weight
Density 1.2 ± 0.1 kg / l (mixed)
Product code 514-series

APPLICATION DETAILS
Application conditions All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +5ºC during application or drying. Relative humidity should not exceed 80%. The surface temperature of the steel should remain at least 3ºC above the dew point.
Preparation Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Temacoat GPL-S Primer, Temacoat GPL-S MIO, Temacoat RM 40, Temacoat SPA, Temabond and Temadur 20.
Finishing Temathane and Temadur.
Painting By airless or conventional spray or by brush. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for
5–30 minutes and then apply the full coat. Depending on the application method and the temperature of the components (base, hardener, thinner) the paint can be thinned 10–15 %. The viscosity should be 30–60 s DIN4. Airless spray nozzle tip 0.011"–0.015" and nozzle pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object.

At conventional spraying the viscosity should be 20–25 s DIN4.

At brush application the paint should be thinned according to the circumstancies.
Mixing of components First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
Cleaning of tools Thinner 1048, 1067 or 1061.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 425 g/litre of paint mixture.
VOC content of the paint mixture (thinned 15% by volume) is 490 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj
Safety data sheetTemathane 50
Thinner safety data sheetTemathane 50
Hardener safety data sheetTemathane 50
 
-


Back

Counter for metal coatings

Tikkurila offers wide range of paints and coatings for metal surfaces for different conditions, applications and needs. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for metal coatings

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.