Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Temathane PC 80

A two-component, glossy polyurethane paint for long-lasting protection of steel structures and storage tanks even in the most demanded off-shore atmosphere.

The paint is solvent-borne
The coverage of the paint on rough surfaces
8,3
m2/l
The coverage of the paint on smooth surfaces
8,3
m2/l

Glossy high-solids topcoat

Temathane PC 80 is a durable, high-solids, polyurethane paint, that is used as a topcoat for epoxy systems especially in protective  coating.

Approved as a topcoat in NORSOK system

The paint system with Temathane PC 80 as a topcoat approved according NORSOK standards.

Excellent weather and abrasion resistance

Due to polyurethane resin Temathane PC 80 has an excellent weather and abrasion resistance. It forms easy-to-clean and non-chalking topcoat with good gloss and color retention.


Temathane PC 80 is widely used for




Paint and coating systems for metal industries


PRODUCT DATA SHEET
07.09.2010

Temathane PC 80 - Polyurethane paint

 
Temathane PC80
DESCRIPTION A high-solids two-component, glossy polyurethane paint, hardener aliphatic isocyanate.
PRODUCT FEATURES Recommended as a glossy topcoat for epoxy systems exposed to weathering.
Recommended uses Recommended for painting of storage tank exterios, steel buildings and other steelwork.

TECHNICAL DATA
Features Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking topcoat with good gloss and colour retention.
Colour Cards RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.
Gloss groups Gloss
Coverage

Recommended film thicknesses

Theoretical coverage

dry

wet

 

80 µm

120 µm

8.3 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1048, 1067 and 1061
Mixing ratio Base 5 parts by volume 524-series
Hardener 1 part by volume 008 7690 or 008 7590
Application method By airless or conventional spray.
Pot-life (+23°C) 1½ hours
Drying times

DFT 80 µm

+ 5 ºC

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

2 h

1 h 15 min

1 h

20 min

Touch dry, after

10 h

8 h

6 h

3½ h

Recoatable, after

No limitations.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 66 ± 2 % volume (ISO 3233)
77 ± 2 % weight
Density 1.3 ± 0.1 kg / l (mixed)
Product code 524-series

APPLICATION DETAILS
Application conditions All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Preparation Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Temacoat GPL-S Primer, Temacoat GF Primer, Temacoat HB Primer, Tembond, Temacoat RM 40, Temacoat SPA, Temadur 20, Temadur Primer, Temaprime GF, Fontecoat EP Primer and Fontecryl 10.
Finishing Temathane and Temadur.
Painting By airless or conventional spray. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5 - 30 minutes and then apply the full coat. Depending on the application method and the termperature of the components (base, hardener, thinner) the paint can be thinned 0 - 15 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Surface treatment First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
Mixing of components Thinner 1048, 1067 or 1061.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 320 g/litre of paint mixture
VOC content of the paint mixture (thinned 15 % by volume) is 400 g/l.
For industrial and professional use only.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTemathane PC 80
Thinner safety data sheetTemathane PC 80
Hardener safety data sheetTemathane PC 80
 
-


Back

Counter for metal coatings

Tikkurila offers wide range of paints and coatings for metal surfaces for different conditions, applications and needs. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for metal coatings

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.