Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Temazinc EE

A one-component matt zinc-dust paint. An easy-to-use primer for steel surfaces exposed to weathering and chemical stress.

The paint is solvent-borne
The coverage of the paint on rough surfaces
11,2
m2/l
The coverage of the paint on smooth surfaces
18,7
m2/l

Cathodic protection for steel

Temazinc EE provides sufficient cathodic protection and is used as a primer for steel surfaces exposed to weathering and chemical stress.

Touch-up primer of zinc primed steel

As a one-component paint Temazinc EE easy to apply by spray, brush or dipping. It is an excellent product for touch-up and maintenance painting.


Temazinc EE can be used for




PRODUCT DATA SHEET
22.02.2010

Temazinc EE - Zinc-dust paint

 
Temazinc EE
DESCRIPTION A one-component zinc-dust paint.
PRODUCT FEATURES Used as a primer for steel surfaces exposed to weathering and chemical stress. Ideal as a touch-up primer on damaged areas of zinc primed steel. Can be used without a topcoat on surfaces exposed to climatic stress.
Recommended uses Steel surfaces.

TECHNICAL DATA
Features Offers cathodic protection for steel.
Colour Range Grey.
Gloss groups Matt
Coverage

Recommended film thicknesses

Theoretical coverage

dry

wet

 

30 µm

55 µm

18.7 m2/l

50 µm

90 µm

11.2 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1006
Application method By dipping, spray or brush.
Drying times

DFT 40 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

15 min

Touch dry, after

3 h

1,5 h

1 h

Recoatable, after

12 h

6 h

3 h


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 56 ± 2 % volume
Density 2.7 kg / l
Product code 008 7395

APPLICATION DETAILS
Application conditions All surfaces must be dry. The temperature of the ambient air or surface should not fall below + 5 ºC during application and drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Preparation Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1)
Finishing TEMANYL MS PRIMER, TEMAPRIME EE and FONTECRYL 10.
Painting By dipping, spray or brush. Mix the paint thoroughly before use. Depending on the application method the paint should be thinned 0 - 10 % by volume. Airless spray nozzle tip 0.015" - 0.021" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.
Cleaning of tools Thinner 1006.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 385 g/litre of paint.
VOC content of the paint (thinned 10 % by volume) is 417 g/l.
For industrial and professional use only.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTemazinc EE
Thinner safety data sheetTemazinc EE
 
-


Back