PRODUCT DATA SHEET
Pinja Wood Stain - Water-borne wood stain
|DESCRIPTION||A fast-drying water-borne wood stain for wooden surfaces.|
|PRODUCT FEATURES||Wood outdoor surfaces|
|Recommended uses||Suitable for wooden window frames, front doors, panels etc.|
|Features||Protects the surface against moisture, sunlight and dirt. Decreases cracking of wood surface.
|Colour Range||Clear. AKVI TONE tinting according to the Translucent Wood Finishes Colour Card.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||abt. 10 % by volume, 11 % by weight.|
|Product code||314 6909 (TCW base paint)|
|Application conditions||The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the stain has to be over 18 ºC and the relative humidity of the air below 70 %.|
|Treatment||Stir the stain carefully before use. Avoid flotation. Thin with water if necessary. Let the product settle down for a while before use.|
|Cleaning of tools||Water.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 30 g/litre of paint. Maximum VOC content in ready to use paint (thinned 4 % by volume) is 50 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial use only.|
|Safety data sheet||Pinja Wood Stain|