Pinjalac Solid Dipp - Acrylate lacquer

Pinjalac Solid Dipp
DESCRIPTION A water-borne acrylate lacquer.
PRODUCT FEATURES A fast-drying and flexible lacquer for outdoors use. Especially suitable for dipping and flow coating application.
Recommended uses Wooden window frames, front doors, panels, garden furniture etc.

Colour Range Clear.
Colour Cards Akvi Tone and Symphony.
Thinner Water and Akvi Thinner
Application method

Dipping, flow coating and spraying.

In dipping/flow coating suitable viscosity is 11 - 13 s (DIN4).
Drying times

(100-120 g/m2)

20 ºC

50 ºC

Dry to sand, after

1 - 3 h

30 - 60 min

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. 

Solids volume abt. 35 volume-%, abt. 37 weight-%.
Density 1.0 kg / litre
Storage 12 months (+ 23 ºC)
Product code 387 6910

Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
Lacquering Stir the lacquer carefully before use. Avoid flotation. Thin with water to the required viscosity. Let the lacquer settle down for 10 - 20 min before use.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 90± 20 g/litre of lacquer.

according to Regulation (EC) No. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetPinjalac Solid Dipp