Pinja Color - Water-borne stain

Pinja Color
DESCRIPTION A water-borne, tintable semi-transparent wood stain.

Protects the surface against moisture, sunlight and dirt.

Decreases cracking of wood surface.

The wood stain does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

Recommended uses Suitable for wooden surfaces such as window frames, exterior doors, walls, log cabins etc.

Colour Cards Valtti Color colour card.
Tinting system: AVATINT.

Recommended spreading amounts (unthinned)

Theoretical coverage




Not measurable

80–100 g/m²

10–14 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner Water
Application method

Airless spraying, air-assisted airless spraying, conventional spraying and vacuum.


For airless spraying, recommended nozzle tip is 0.009"–0.011" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object.


For air-assisted airless spraying, recommended nozzle tip is 0.009"–0.011"  and  pressure 40–120 bar. Atomising air pressure should be about 1–3  bar. Spray angle shall be chosen according to the shape of the object.


For conventional spraying, recommended nozzle tip 1.0–1.4 mm and  pressure 1.5–3.0 bar.

Drying times

80–100 g/m2


Dry to handle, after

30 min

Drying time is dependent on the temperature and moisture content of the air.

Solids volume 12±2% by volume
13±2% by weight
Density 1.0 kg /litre (clear)
Product code 316 serie

Application conditions The surface to be treated has to be clean and dry. The moisture content of the wood should be below 19%. During application and drying the temperature of the air, the surface to be treated and the stain has to be over +5ºC and the relative humidity of the air below 80%.
Preparation Untreated surfaces:
Clean surface from dirt, dust and loose material.
Priming Recommended primers:
Pinjasol, Valtti Base or Pinja Oil.
Staining Stir Pinjacolor carefully before use. The product is ready for use.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 30 g/litre of stain.Only for professional use.

Only for professional use.

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetPinja Color