Akvi Primer (Akvi Surf-O) |
|
| DESCRIPTION |
Water-borne acrylate primer. |
| PRODUCT FEATURES |
Wooden surfaces in interior premises. |
| RECOMMENDED USES |
Suitable for furniture, doors, mouldings and other wooden surfaces in interior premises.
|
|
| TECHNICAL DATA |
| Features |
A water-borne, fast drying primer with good sanding properties. Recoatable either with water-borne or solvent-borne products. |
| Colour Range |
White |
| Gloss groups |
Matt |
| Gloss measurement standard |
ISO 2813/60º |
| Emission classification |
The paint does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment. |
| Coverage |
|
Recommended spreading amounts (unthinned)
|
Theoretical coverage
|
|
wet
/ one layer
|
theoretical
dry film thickness
|
|
|
135 g/m2
|
40
µm
|
10
- 11 m2/l
|
|
| Thinner |
Water and Akvi Thinner |
| Application method |
|
Application technique
|
Viscosity DIN4
|
|
Low pressure spraying
|
40 - 80 s
|
|
Airless spraying
|
40 - 80 s
|
|
| Drying times |
(100 -
120 g/m2)
|
20 ºC
|
50 ºC
|
70 ºC
|
IRM
|
|
Dry to sand, after
|
30 - 60 min
|
5 - 15 min
|
2 - 10 min
|
1 - 2 min
|
|
| Solids volume |
abt. 42 volume-%, 60 weight-%. |
| Density |
1.4 kg/litre. |
| Storage |
6 months (+23 ºC) |
| Product code |
006 5021 |
|
| APPLICATION DETAILS |
| Application conditions |
The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the primer has to be over 18 ºC and the relative humidity of the air below 70 %. |
| Painting |
Stir the primer carefully before use. Avoid flotation. Thin the primer with water or Akvi Thinner if necessary. |
| EU VOC 2004/42/EC-limit value |
The Volatile Organic Compounds amount is 50 g/litre of paint. Maximum VOC content in ready to use paint (thinned 10 % by volume) is 100 g/l.
|
|
| HEALTH AND SAFETY CLASSIFICATION |
|
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
|
| Product safety data sheet | AKVI PRIMER (former AKVI SURF-O, primer) [GB-ENG] |
| |
| - |
|
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
Back
