Tikkurila worldwide
Tikkurila PRODUCT DATA SHEET
13.01.2006

Merit Elektra 25, 35

DESCRIPTION Two component acid catalysed lacquer.
PRODUCT FEATURES Wooden surfaces indoors. Recommended especially for electrostatic spraying.
RECOMMENDED USES Suitable for lacquering of furniture, doors and other similar wooden surfaces.

TECHNICAL DATA
Features A thixotropic lacquer with good filling properties.
Gloss groups Semi-matt and Semi-gloss
Gloss measurement standard ISO 2813/60º
Emission classification Fulfils the requirements of DIN-norm 55 666, formaldehyde content max. 0.12mg/m3 air.
Coverage

4 - 6 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1033 and 1046
Mixing ratio Lacquer 100 parts by volume 005 2740, 005 2744
Hardener 8 parts by volume 006 2093
Application method

Application technique

Viscosity DIN4

Low pressure spraying

18 - 23 s

Airless spraying

25 - 30 s

Electrostatic spraying

16 - 20 s

Pot-life (+23°C) 48 hours
Drying times

(110 - 120 g/m2)

50 ºC

70 ºC

Dry to sand, after

30 - 40 min

20 - 30 min

Dry to stack, after

60 - 70 min

40 - 50 min


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 50 volume %, 57 weight %
Density 1.0 kg / litre
Product code 005 2740 and 005 2744

APPLICATION DETAILS
Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
Lacquering Stir the lacquer carefully before use. Add 8 volume % of Hardener 006 2093. Thin the lacquer to the viscosity required. Let the mixture stabilize about half an hour and check the viscosity again. At normal spraying you can add 10 volume % of Hardener 006 2098 and thin with Thinner 1027 or 1033. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers. In case the lacquer mixture is used on the next day, add at least an equal amount of fresh lacquer mixture.
Cleaning of tools Thinner 1027, 1033 or 1046.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 420 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 519 g/l.

HEALTH AND SAFETY CLASSIFICATION
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-

The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.

Back