Pinja Flex Primer (Akvi Flex Primer) |
|
| DESCRIPTION |
Water-borne acrylate primer. |
| PRODUCT FEATURES |
A fast drying, flexible primer for exterior use. |
| RECOMMENDED USES |
Suitable for wooden window frames and front doors. |
|
| TECHNICAL DATA |
| Colour Range |
White TVT 0201. |
| Gloss groups |
Matt |
| Gloss measurement standard |
ISO 2813/60º |
| Emission classification |
The primer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment. |
| Coverage |
|
Recommended spreading amounts (thinned 5 vol-%)
|
Theoretical coverage
|
|
wet
/ one layer
|
theoretical
dry film thickness
|
|
|
150 g/m2
|
40
µm
|
8
- 9 m2/l
|
|
| Thinner |
Water |
| Application method |
|
Application technique
|
Viscosity DIN4
|
|
Low pressure spraying
|
delivery viscosity
|
|
Airless spraying
|
delivery viscosity
|
|
Curtain coating
|
delivery viscosity
|
|
Electrostatic spraying
|
delivery viscosity
|
|
| Drying times |
100 -
120 g/m2
|
20 ºC
|
50 ºC
|
|
Dry to sand, after
|
1 h
|
30 min
|
|
Dry to stack, after
|
4 h
|
3 h
|
|
| Solids volume |
abt. 35 volume %, 50 weight %. |
| Density |
1.3 kg/litre. |
| Storage |
6 months (+23 ºC). |
| Product code |
006 5000 |
|
| APPLICATION DETAILS |
| Application conditions |
The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the primer has to be over 18 ºC and the relative humidity of the air below 70 %. |
| Painting |
Stir the primer carefully before use. Avoid flotation. For spray application thin the primer 5 - 15 % with water. |
| Cleaning of tools |
Vesi |
| EU VOC 2004/42/EC-limit value |
The Volatile Organic Compounds amount is 64 g/litre of paint.
|
|
| HEALTH AND SAFETY CLASSIFICATION |
|
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
|
| Product safety data sheet | PINJA FLEX PRIMER (former AKVI FLEX PRIMER) [GB-ENG] |
| |
| - |
|
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
Back
