 |
PRODUCT DATA SHEET 13.10.2011 |
||||||||||
Akvilac 40 TCW |
|||||||||||
| DESCRIPTION | Waterborne acrylate lacquer. | ||||||||||
| PRODUCT FEATURES |
|
||||||||||
| RECOMMENDED USES | Suitable for furniture, panels, doors etc. wooden surfaces. | ||||||||||
| TECHNICAL DATA | |||||||||||
| Features | fast drying all-round lacquer for interior use. | ||||||||||
| Colour Range | Temaspeed Akvi Tone -tinting. | ||||||||||
| Gloss groups | Semi-gloss | ||||||||||
| Coverage |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
||||||||||
| Thinner | Akvi Thinner and Water | ||||||||||
| Application method |
|
||||||||||
| Curing |
Stacking temperature below 35 ºC. Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
||||||||||
| Solids volume | abt. 32 % by volume, 34 % by weight.
|
||||||||||
| Density | 1.0 kg/litre | ||||||||||
| Product code | 434 6909 | ||||||||||
| APPLICATION DETAILS | |||||||||||
| Application conditions | The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %. | ||||||||||
| Lacquering | Stir the lacquer carefully before use. Avoid flotation. The lacquer is recommended to use without thinning. If necessary thin the lacquer with water or Akvi Thinner. | ||||||||||
| Surface treatment | Application (+23 °C)
Airless spraying application. Nozzle tip 0.011" to 0.015" is recommended to be used with pressure of 100 - 160 bar. Spray angle shall be chosen according to the shape of the object. Air assisted airless application. Nozzle tip 0.011" - 0.015" is recommended to be used with pressure 40 - 140 bar. Air pressure of conventional spraying is recommended 1 - 3 bar. Spray angle shall be chosen according to the shape of the object. Conventional application. Nozzle tip 1.4 - 1.8 mm is recommended to be used with pressure 2 - 3 bar. |
||||||||||
| Mixing of components | Product is one-component, no hardener needed. Stir the lacquer carefully before use. Avoid flotation. If necessary thin the lacquer with water or Akvi Thinner. | ||||||||||
| Cleaning of tools | Water. | ||||||||||
| EU VOC 2004/42/EC-limit value | The Volatile Organic Compounds amount is 80 g/l.
Maximum VOC content in ready to use lacquer (thinned with water 5 % by volume)is 77 g/l. Maximum VOC content in ready to use lacquer (thinned with Akvi Thinner 5 % by volume) is 96 g/l. |
||||||||||
| HEALTH AND SAFETY CLASSIFICATION | |||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. Only for professional and industrial use. | |||||||||||
| Product safety data sheet | AKVILAC 40 (former PINJALAC 50) [GB-ENG] | ||||||||||
| - | |||||||||||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
