Pinja Flex 30 (Akvi Flex 30) |
|
| DESCRIPTION |
Water-borne acrylate paint. |
| PRODUCT FEATURES |
A fast drying and flexible paint for exterior use. |
| RECOMMENDED USES |
Suitable for wooden window frames and front doors. |
|
| TECHNICAL DATA |
| Colour Range |
TEMASPEED FONTE tinting. For exterior use it is recommended to use the shades on the House Paint colour card. |
| Gloss groups |
Semi-gloss |
| Gloss measurement standard |
ISO 2813/60º |
| Coverage |
|
Recommended spreading amounts (unthinned) |
Theoretical coverage |
|
wet / one layer |
theoretical dry film thickness |
|
|
155 g/m2 |
50 µm |
8 - 9 m2/l | |
| Thinner |
Water |
| Application method |
|
Application technique |
Viscosity DIN4 |
|
Low pressure spraying |
delivery viscosity |
|
Airless spraying |
delivery viscosity |
|
Curtain coating |
delivery viscosity |
|
Electrostatic spraying |
delivery viscosity | |
| Drying times |
|
(100 - 120 g/m2) |
20 ºC |
50 ºC |
70 ºC |
IRM |
|
Dry to sand, after |
1 h |
30 min |
15 min |
1 - 2 min |
|
Dry to handle, after |
4 h |
3 h |
2 h |
2 min | |
| Solids volume |
abt. 42 volume-%, 53 weight-% |
| Density |
1.2 kg/litre |
| Product code |
A-base, 787 6001, C-base, 787 6003 |
|
| APPLICATION DETAILS |
| Application conditions |
The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over + 18 ºC and the relative humidity of the air below 70 %. |
| Painting |
Stir the paint carefully before use. Avoid flotation. For spray application thin the paint
5 - 15 % with water. |
| Cleaning of tools |
Water |
| EU VOC 2004/42/EC-limit value |
The Volatile Organic Compounds amount is 65 g/litre . |
|
| HEALTH AND SAFETY CLASSIFICATION |
|
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Oy. |
| Product safety data sheet | PINJA FLEX 30 (former AKVI FLEX 30) [GB-ENG] |
| |
| - |
|
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
Back
