Akvilac Topas 20, 40 (Akvi Topas 20, 40) |
|
| DESCRIPTION |
Waterborne polyurethane-acrylate lacquer. |
| PRODUCT FEATURES |
A fast drying and durable waterborne laqcuer for high demands in interior use. |
| RECOMMENDED USES |
Suitable for furniture, doors, mouldings, floors and other wooden surfaces. |
|
| TECHNICAL DATA |
| Gloss groups |
Semi-gloss and Semi-matt |
| Gloss measurement standard |
ISO 2813/60º |
| Emission classification |
The lacquer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment. |
| Coverage |
|
Recommended spreading amounts (unthinned)
|
Theoretical coverage
|
|
wet
/ one layer
|
theoretical
dry film thickness
|
|
|
120 g/m2
|
40
µm
|
8
- 9 m2/l
|
|
| Thinner |
Water |
| Application method |
|
Application technique
|
Viscosity DIN4
|
|
Low pressure spraying
|
30 - 60 s
|
|
Airless spraying
|
30 - 60 s
|
|
Electrostatic spraying
|
30 - 60 s
|
|
| Drying times |
|
(100 -
120 g/m2)
|
20 ºC
|
50 ºC
|
70 ºC
|
IRM
|
|
Dry to sand, after
|
20 - 60 min
|
5 - 15 min
|
2 - 5 min
|
2 - 3 min
|
Stacking temperature below 35 ºC.
|
| Solids volume |
Abt. 32 % by volume, 34 % by weight. |
| Product code |
005 3868 and 005 3869 |
|
| APPLICATION DETAILS |
| Application conditions |
The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %. |
| Treatment |
Stir the lacquer carefully before use. Avoid flotation. For spray application thin the lacquer with water or Akvi Thinner if necessary. |
| Cleaning of tools |
Water |
| EU VOC 2004/42/EC-limit value |
The Volatile Organic Compounds amount is 130 g/litre of lacquer. Maximum VOC content in ready to use lacquer (thinned 10 % by volume) is 150g/litre.
|
|
| HEALTH AND SAFETY CLASSIFICATION |
|
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
|
| Product safety data sheet | AKVILAC TOPAS 40, 20 (former AKVI TOPAS 40, 20, 10) [GB-ENG] |
| |
| - |
|
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
Back
