 |
PRODUCT DATA SHEET 29.11.2010 |
|
Colowood |
||
| DESCRIPTION | Waterborne filler for wooden surfaces. | |
| PRODUCT FEATURES | For filling holes in interior wooden surfaces such as fibre boards, solid wood or veneer. | |
| RECOMMENDED USES | Recommended for furniture, doors, panel walls and ceilings. | |
| TECHNICAL DATA | ||
| Colour Range | Pine, knot of pine, birch, knot of birch, oak, knot of oak, beech, white and mahogany. | |
| Coverage | 6 - 7 m2/l (100 μm). | |
| Thinner | Water | |
| Application method | By spatula. | |
| Drying times | Thin filling layer can be sanded after 4 hours and deeper filling layer after 24 hours. |
|
| Solids volume | Abt. 67±2 % by volume, 83±2 % by weight. | |
| Density | 1.98 - 2.06 kg/litre | |
| Product code | 007 2074, 2075, 2083, 2077, 2076, 2080, 2079, 2078 and 2081. | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be treated must be dry, the temperature of the air at least 5 ºC and the relative humidity of the air below 80 %. | |
| Treatment | Remove dirt from the surface. Brush away dust and loose material. Apply with a spatula. Thin with water, if necessary. Fill large holes preferably twice or several times. Sand the surface and remove sanding dust. The surface can be recoated with Tikkurila's WB, WB-UV and SB products. | |
| Cleaning of tools | Water. | |
| EU VOC 2004/42/EC-limit value | The Volatile Organic Compounds amount is 20 g/litre of putty.
Maximum VOC content in ready to use putty is 20 g/l. |
|
| HEALTH AND SAFETY CLASSIFICATION | ||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. | ||
| Product safety data sheet | COLOWOOD putty [GB-ENG] | |
| - | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
