Fontefacade CC 30

A water-borne one-component acrylate exterior single-coat paint.

Finish

  • Semi-matt

Description

A water-borne one-component acrylate exterior single-coat paint.


Product Features

• Suitable for fast production lines and drying in elevated temperature as well as in room temperature. • Especially suitable for roller and curtain coating. • Good anti-blocking properties. • The paint can be used as a primer and a top coat. • Good weathering resistance. • Metallic color shades also possible.


Recommended Uses

• Recommended to be used for exterior mineral substrates such as fibre cement flat sheets.


Coverage

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.


Thinner

Waterborne


Storage

Must not freeze. The best storage temperature is between +15–+25°C.


Application Conditions

The surface to be treated has to be clean and dry. During application and drying temperature of the air, substrate and paint must be over +10°C and relative humidity of the air below 70%. Good ventilation is also very important.


Surface preparation

Surfaces must be free of dirt, dust and grease.


Painting

First coat:

Stir the paint carefully before use. For curtain coating, the product is thinned approximately 0–5% to the viscosity 50–80s (DIN4). Avoid too high pumping pressure and flowing speed. For airless spraying, recommended nozzle tip is 0.015"–0.019" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object. For air-assisted airless spraying, recommended nozzle tip is 0.015"–0.019" and pressure 80–160 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object. Metallic color shades are recommended to be applied by conventional spraying. Nozzle tip 1.8 mm and the nozzle pressure 2–3 bar. If needed the product is thinned approximately 0–5% with water.


Cleaning of tools

Water.


VOC

According to VOC Directive 2004/42/EU the product subcategory A/i VOC limit (1.1.2010) is maximum 140 g/l. VOC content of "Fontefacade CC 30" is max 140 g/l.


English
Hello!

You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?

has been added to saved.
has been removed from saved.
en