PRODUCT DATA SHEET
(Previous date 01.01.2012)'
Valtti Puuöljy (Wood Oil)
|DESCRIPTION||Solvent-borne wood oil for outdoor use containing wax.|
|PRODUCT FEATURES||Suitable for clean wood or previously treated with oil for outdoor use, also for hardwood, thermowood, impregnated and untreated wood.
|RECOMMENDED USES||Garden furniture, terraces, jetties and stairs.|
|Colour Range||Colourless. Tinted according to the Valtti colour card.|
5 - 7 m2/l on old and worn wood surface
7 - 15 m2/l on new surface and wood surface in good condition
|Can sizes||0.9 l, 2.7 l, 9 l|
|Thinner||White Spirit 1050|
|Application method||Brush or sponge.|
|Drying time at 23°C and 50% relative air humidity||Surface dries in several hours. The porosity of the base and the amount of oil used affects the drying time. Apply the second coat as soon as the surface is dry, after few hours depending on the weather conditions.|
|Weather resistance||We recommend to use a tinted product, which provides better weather resistance than a colourless product.
Carry out maintenance when necessary. Surfaces continuously exposed to the weather may need to be treated annually
|Solids volume||18 %.|
|Density||0.8 kg/l, ISO 2811.|
|Storage||Unaffected by cold storage or transportation Once opened, use up the product in the can during the same work project. Product characteristics may vary in half-empty cans.|
|Application conditions||The surface to be treated must be dry and relative wood moisture content less than 20 %, as damp wood will not absorb oil, which dries slowly. As impregnated wood is often damp, we recommend treatment after a 6-month drying period.
During treatment and drying, air, surface, and product temperature must be at least +5 º C and relative air humidity less than 80%.
Remove all dirt, dust and loose material from the surface. Wash dirty wood surface with Terassi- ja Kalustepesu according to instructions.
Surface previously treated with wood oil:
Remove loose material from the surfaces with a scraper or wire brush. Wash dirty wood surface Terassi- ja Kalustepesu according to instructions. If a clear film remains on the surface, remove it before treatment.
|Application||Stir Valtti Wood Oil thoroughly before and frequently during use. Spread oil with a brush or sponge tightly so that all of the oil is absorbed into the wood evenly. To avoid overlapping, apply continuous strokes the entire length of the board covering the whole surface evenly. Apply one coat on garden furniture. Porous wood might need two coats. When treating jetties take care that the oil does not end up in the water.
Apply the second coat as soon as the oil is absorbed and the surface is dry, after few hours depending on the weather conditions. Oil treatment will make the wood colour darker. Carry out maintenance when necessary. Surfaces continuously exposed to the weather may need to be treated annually.
|Cleaning of tools||White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner)|
|Maintenance instructions||After application, treat the surface carefully for the first week to allow it to achieve the final hardness and durability. After two days, gently clean the surface with a soft brush or mop if necessary.
Clean dirty surfaces with Pihan Huoltopesu (1 part of Pihan Huoltopesu to 10 parts water). Remove stains and clean very dirty surfaces with a stronger solution of Pihan Huoltopesu (1:1). After washing, rinse the surfaces and allow to dry.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|Contains: Hydrocarbons, C9-C11, n-alkanes,isoalkanes,cyclics,<2% aromatics, 2-octyl-2H-isothiazol-3-one and 4,5-dichloro-2-octyl-2H-isothiazol-3-one. Danger. Flammable liquid and vapor. May cause an allergic skin reaction. May be fatal if swallowed and enters airways. May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing vapor. Wear protective gloves. Use only outdoors or in a well-ventilated area. Keep away from sparks and open flames. - No smoking. Avoid release to the environment. IF ON SKIN: Wash with plenty of soap and water. IF SWALLOWED: Immediately call a POISON CENTER or physician. Do NOT induce vomiting. A Material Safety Data Sheet is available at request Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. NOTE! Cleaning cloths or sanding dust containing the product can create fire by auto-ignitition and should be stored in water before disposal, or be dried outdoors or incinerated immediately.|
|TRANSPORT||VAK/ADR 3 III|
|sre130516 / dco111008 / ofl090309 / mli130109 / akk180516 / 257 0070|