Tikkurila worldwide
(Previous date 29.02.2008)'

Feelings Effect Finish

Feelings EffectFinish 1L WEB
DESCRIPTION Full-matt acrylate-based translucent effect paint.

Interior walls in rooms on surfaces which have been previously painted with Feelings Interior Paint. Not suitable for painting doors or furniture.

RECOMMENDED USES Interior walls and ceilings in residential, commercial and storage buildings.

  The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints CAP
Colour Range Available in the Feelings Interior Colour range and the Tikkurila Symphony 2436 Colour Collection. Also available in BS 4800, NCS, RAL and most other colour ranges.
The final colour of the Feelings Effect Paint will depend upon the colour of the Feelings Interior Paint used as the basecoat.
Gloss grade Full-matt
Building material emission class M1
Coverage 13-18 m2/l. depending on application method. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture and porosity of the substrate.
Can sizes 0,9 l, 2,7 l.
Thinner Water
Application method

Brush or roller application. Finishing with effect roller, brush or other patterning tool.

Drying time at 23°C and 50% relative air humidity

Touch-dry after 12 hours. Recoatable after approx. 1 day.

Wash resistance Withstands wlight iping with a damp cloth
Heat resistance 85 °C, ISO 4211-3.
Solids volume Approx. 12% depending on the colour.
Density approx. 1.0 kg/l
Storage Protect from frost.
Product code 813_0601

Application conditions All surfaces to be painted must be dry, the temperature of the air above +10OC, and the relative humidity of the air between 30 and 70%.
Preparation Surfaces must be clean, dry, and free from grease, dirt, oil, wax, all loose material and surface contamination. Use recommended Tikkurila products as cleaning agents and for mould removal. Use recommended Tikkurila fillers for filling cracks, nail holes, blemishes, etc., and leveling of uneven surfaces. Ensure that existing glossy, gloss painted and filled surfaces are thoroughly flatted down. Ensure that all surfaces are thoroughly prepared.
Priming Prime unpainted walls with Feelings Universal Primer. Paint with Feelings Interior Paint
2 times. Paint previously painted walls 1-2 times to the desired colour with Feelings Interior Paint.
Painting Stir the can thoroughly and apply one coat of Feelings Effect Finish evenly. Finish immediately by using a roller, brush or sponge working in approximately 1 metre strips. When a more translucent end result is required, thin the product by 5-10 % with water.
Cleaning of tools Remove excess paint from tools and clean with water immediately after use.
Maintenance instructions At the earliest after approx. one month after painting the surfaces can be cleaned with dry brush or dust towel, if needed. Clean soiled surfaces with a neutral (pH 6-8) detergent solution using a damp cleaning cloth. Rinse and dry immediately after treatment. Follow manufacturer’s instruction when diluting the detergent.

After treatment, handle the surface with care for a few weeks. Surface reaches its final hardness and durability in approx. 1 month under normal circumstances. If cleaning is needed soon after treatment, clean surface lightly with a dry or damp cleaning cloth.
Maintenance treatment Maintenance painting:
Apply Feelings Interior Paint.
EU VOC 2004/42/EC-limit value (cat A/l) 200g/l(2010)
Feelings Effect Finish contains VOC max. 200g/l.

according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety Data Sheet - Feelings Effect Paint

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
ssa290208 / joa260308 / ars010408 / 813-