PRODUCT DATA SHEET
(Previous date 29.02.2008)'
Feelings Effect Finish
|DESCRIPTION||Full-matt acrylate-based translucent effect paint.|
Interior walls in rooms on surfaces which have been previously painted with Feelings Interior Paint. Not suitable for painting doors or furniture.
|RECOMMENDED USES||Interior walls and ceilings in residential, commercial and storage buildings.|
|Colour Range||Available in the Feelings Interior Colour range and the Tikkurila Symphony 2436 Colour Collection. Also available in BS 4800, NCS, RAL and most other colour ranges.
The final colour of the Feelings Effect Paint will depend upon the colour of the Feelings Interior Paint used as the basecoat.
|Building material emission class||M1|
|Coverage||13-18 m2/l. depending on application method. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture and porosity of the substrate.|
|Can sizes||0,9 l, 2,7 l.|
Brush or roller application. Finishing with effect roller, brush or other patterning tool.
|Drying time at 23°C and 50% relative air humidity||
Touch-dry after 12 hours. Recoatable after approx. 1 day.
|Wash resistance||Withstands wlight iping with a damp cloth|
|Heat resistance||85 °C, ISO 4211-3.|
|Solids volume||Approx. 12% depending on the colour.|
|Density||approx. 1.0 kg/l|
|Storage||Protect from frost.|
|Application conditions||All surfaces to be painted must be dry, the temperature of the air above +10OC, and the relative humidity of the air between 30 and 70%.|
|Preparation||Surfaces must be clean, dry, and free from grease, dirt, oil, wax, all loose material and surface contamination. Use recommended Tikkurila products as cleaning agents and for mould removal. Use recommended Tikkurila fillers for filling cracks, nail holes, blemishes, etc., and leveling of uneven surfaces. Ensure that existing glossy, gloss painted and filled surfaces are thoroughly flatted down. Ensure that all surfaces are thoroughly prepared.
|Priming||Prime unpainted walls with Feelings Universal Primer. Paint with Feelings Interior Paint
2 times. Paint previously painted walls 1-2 times to the desired colour with Feelings Interior Paint.
|Painting||Stir the can thoroughly and apply one coat of Feelings Effect Finish evenly. Finish immediately by using a roller, brush or sponge working in approximately 1 metre strips. When a more translucent end result is required, thin the product by 5-10 % with water.|
|Cleaning of tools||Remove excess paint from tools and clean with water immediately after use.|
|Maintenance instructions||At the earliest after approx. one month after painting the surfaces can be cleaned with dry brush or dust towel, if needed. Clean soiled surfaces with a neutral (pH 6-8) detergent solution using a damp cleaning cloth. Rinse and dry immediately after treatment. Follow manufacturer’s instruction when diluting the detergent.
After treatment, handle the surface with care for a few weeks. Surface reaches its final hardness and durability in approx. 1 month under normal circumstances. If cleaning is needed soon after treatment, clean surface lightly with a dry or damp cleaning cloth.
|Maintenance treatment||Maintenance painting:
Apply Feelings Interior Paint.
|EU VOC 2004/42/EC-limit value||(cat A/l) 200g/l(2010)
Feelings Effect Finish contains VOC max. 200g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety Data Sheet - Feelings Effect Paint|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|ssa290208 / joa260308 / ars010408 / 813-|