Tikkurila worldwide
(Previous date 19.11.2015)'

ClimateCooler Hypercoat Primer

DESCRIPTION A solvent-borne one-component polyurethane primer.

Bitumen, fiber-cement sheets and concrete tiles.

Used as a primer to improve adhesion before applying ClimateCooler Hypercoat.

RECOMMENDED USES Especially for flat roofs with ponding water, or extremely worn bitumen roofs.

  The paint is suitable for roofs
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Colour Range Colorless.
Coverage 100 -200 g/m2 depending on the porosity of substrate.
Can sizes 5 kg.
Application method Brush, roller or spray.
Drying time at 23°C and 50% relative air humidity

Touch dry 4 -6 hours.

Apply ClimateCooler Hypercoat topcoat after 6 - 24 hours.
Solids volume approx. 44 %.
Density approx 0.9 - 1 kg/l, ISO 2811.

Application conditions The surface to be painted must be clean, solid and dry, air temperature +8 – 35C and relative humidity of the air should not exceed 85 %.
Preparation Clean the surfaces using a high-pressure washer, if possible. Remove oil, grease and wax contaminations. Cement laitance, loose particles, mould release agents and cured membrane must be removed. Apply ClimateCooler Cleaner solution according to instructions if needed.

Applicable national health and safety precautions must be followed in the treatment of substrates containing asbestos.
Priming Apply with brush or roller. Once cured, the ClimateCooler Hypercoat topcoat can be applied.
Diluting Do not dilute. Ready to use.
Finishing Apply with brush or roller. Once cured, the ClimateCooler Hypercoat topcoat can be applied.

Note! Use ClimateCooler Thinner when using airless spraying.
Check the condition of the roof before starting the work.
EU VOC 2004/42/EC-limit value (cat A/i) 500 g/l(2010)
ClimateCooler Hypercoat Primer VOC max.500 g/l.

according to Regulation (EC) No. 1272/2008
Contains: Reaction mass of m-xylene and o-xylene and p-xylene and ethylbenzene 4,4'-methylenediphenyl diisocyanate. Danger. Flammable liquid and vapor. Causes serious eye irritation. Causes skin irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of causing cancer. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. Contains isocyanates. May produce an allergic reaction. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not breathe vapor or spray. Wear protective gloves/clothing. In case of inadequate ventilation wear respiratory protection. Keep away from sparks and open flames. - No smoking. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or physician. IF IN EYES: Rinse cautiously with water for several minutes. IF ON SKIN: Wash with plenty of soap and water. A Safety Data Sheet is available on request. CLIMATECOOLER_HYPERCOAT_PRIMER_EN

ENVIRONMENTAL and WASTE DISPOSAL A Material Safety Data Sheet is available at request. Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.