Tikkurila worldwide
(Previous date 19.11.2015)'

ClimateCooler Uni Primer

DESCRIPTION Heat-reflecting water-borne modified acrylate paint.

Priming of roofs before applying ClimateCooler Uni Topcoat or ClimateCooler Catalyst.

RECOMMENDED USES Concrete tiles, fiber-cement sheets and primed steel sheet roofs.

  The paint is suitable for roofs The paint is matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Features Solar reflectance: Reflects up to 80 % of the heat radiation. The best heat-reflectance result will be achieved together with ClimateCooler Uni Topcoat.
Colour Range White.
Gloss grade Matt
Coverage 3 - 5 m2/l
Can sizes 20 l
Thinner Water
Mixing ratio Water, up to 10 %, depending on the substrate.
Application method Roller, brush, or spray (airless). High pressure spray nozzle 0.019" – 0.021" (nominal angle 40°- 50°).
Drying time at 23°C and 50% relative air humidity Withstands rain and dew 1 hour after application. Topcoat can be applied 1-3 hours later. Drying will be slower with higher relative humidity of the air and at lower temperatures.
Solids volume approx. 32 %.
Density approx. 1.20 kg/l, ISO 2811.
Storage Protect from frost.

Application conditions The surface to be painted must be solid and dry, air temperature at least +8C and relative humidity of the air below 80 %. Schedule the painting work so that paint film will be dry before the evening dew. Do not paint under the risk of rain.
Preparation Clean the surfaces from dirt, dust, moss and lichen. Use high pressure washer, avoiding damaging the substrate and structures. Wash roofs with ClimateCooler Cleaner solution according to instructions if needed.
Applicable national health and safety precautions must be followed in the treatment of substrates containing asbestos.

Priming Mix the primer carefully before use.

Apply wet film thickness 200 – 225 µm in one coat: The primer can be thinned 5 -10 % with water, according to the porosity of the substrate.

Note! Check the condition of the roof before starting the work.

Cleaning of tools Clean tools with water. Slightly hardened tools can be cleaned with Pensselipesu Tool Cleaner.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l(2010)
ClimateCooler Uni Primer contains VOC max. 140g/l.

according to Regulation (EC) No. 1272/2008
Harmful to aquatic life with long lasting effects. Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) and 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. Wear protective gloves. Avoid release to the environment. A Safety Data Sheet is available on request. CLIMATECOOLER_UNI_PRIMER_EN

ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT Not classified.