Tikkurila worldwide
(Previous date 19.12.2014)'

Maalarin Valkolakka (Painter's White) 30 semi-matt and 90 gloss

DESCRIPTION Alkyd paint with good hiding and covering properties for interior painting of wood, metal, chipboard and wood fibre board surfaces.

Suitable for both maintenance painting and painting of untreated surfaces.   

RECOMMENDED USES Doors, window frames, moldings and interior supplies.

  Tool: roller Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints AM
Colour Range Light colors in Tikkurila Symphony colour cards.
Coverage 15 m2/l
Can sizes semi-matt: 0.9 l, 2.7 l, 9 l
gloss: 0.9 l, 2.7 l
white standard color 1/3 l
Application method

Brush or short-napped roller (Gloss product: only with brush)

Drying time at 23°C and 50% relative air humidity Dust dry in 6 hours and recoatable after approx. 24 hours.

Note! Windows can be closed at the earliest after 3 days.

Wash resistance Good on ordinary cleaning detergents (SFS 3755)
Chemical resistance Solvents: Resists Turpetine, White Spirit and Methylated Spirit, does not resist e.g. Thinner
Oil and grease resistance Oils and greases: Resists vegetable and animal fats, lubricating oils and greases.
Solids volume Approx. 65 %
Density Approx. 1.4 kg/l, ISO 2811
Storage Unaffected either by cold storage or transport. Poorly closed or incompletely filled can does not stand storing.
Product code 400-s. and 470-s.

Application conditions The surface to be painted must be dry, the temperature of the air at least +5 °C, and the relative humidity of the air below 80%. NB: Under the circumstances mentioned above, drying is notably slower than under standard circumstances (+23°C, relative humidity 50%).

Preparation Unpainted surfaces:
Remove all dirt, grease and dust. Prime wood surfaces with Jehu Primer and metal surfaces with Otex Adhesion Primer.

Previously painted surfaces: Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Remove loose, flaking paint with a scraper and sand the whole surface. Remove sanding dust. Fill holes and cracks with Presto Furniture Filler or Lacquer Putty. Sand the filled spots and remove sanding dust. If needed, prime with Jehu Primer. Metal surfaces and industrially with acid-curing paint or lacquer finished surfaces should be primed with Otex Primer.
Diluting Does not need to be diluted.
Painting Stir Maalarin Valkolakka when necessary. Apply two coats by brush or roller.
One coat is enough on primed or previously with same colour painted surfaces.

Cleaning of tools Clean tools with White Spirit 1050 or with Tikkurila Pensselipesu (Tool Cleaner)
Maintenance instructions Avoid cleansing approx. 1 month after the painting work.
Clean surface with a neutral (pH 6-8) dishwashing agent and a soft brush, sponge or a cleaning cloth. Soiled surfaces can be cleansed with a cleaning cloth or a sponge using a neutral (pH 8-10) detergent. Rinse surface carefully after maintenance.

Handle the surface with care, ultimate durability and hardness is reached in approx. one month under normal circumstances. If cleansing is needed, use a soft brush or a damp cleaning cloth.
Maintenance treatment Surfaces painted with Maalarin Valkolakka can be maintenance painted with same type of paint or with Helmi Furniture paint. See directions from section "Pretreatment".
EU VOC 2004/42/EC-limit value (cat A/d) 300g/l(2010)
Maalarin Valkolakka contains VOC max. 300g/l

according to Regulation (EC) No. 1272/2008
Contains: Naphtha, hydrotreated heavy FLAMMABLE. Use only in well-ventilated areas. Do not breathe vapour/spray. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. Contains methyl ethyl ketoxime and cobalt octoate. May produce an allergic reaction. A Safety Data Sheet is available at request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT ADR: 3 III, Drums/vessels < 450 litres: not subject to ADR because of high viscosity
ser171115 / garta181214 / niear220611 / mkv151214 / 400- ja 470