PRODUCT DATA SHEET
(Previous date 28.05.2010)'
Paneeli-Ässä Titan (Panel Ace Titan ) - Panel Lacquer
|DESCRIPTION||Semi-matt, water-borne acrylate lacquer for interior use.|
Panel-Ace Titan contains an inorganic protective agent (UV titanium dioxide) which effectively filters off the UV-radiation of the sun and ensures long-lasting protection against darkening of wood.
|RECOMMENDED USES||Panelled walls and ceilings, log surfaces and other similar light-coloured wooden surfaces. Dry lacquer surfaces are slightly whitish. Panel-Ace Titan is not suitable for treatment of dark wood surfaces.|
|Coverage||8 - 12 m2/l for sawn surfaces|
|Can sizes||1 l, 3 l and 10 l|
|Application method||Brush and spray
|Drying time at 23°C and 50% relative air humidity||
Dust dry after 1/2 hour, sandable and re-coatable after 2-3 hours. Ready to use on the following day. The lacquered surface achieves its final hardness after 1 month.
|Density||n. 1.0 kg/l ISO 2811|
|Storage||Protect from frost.|
|Application conditions||The surface to be treated must be dry, the temperature of the air at least +10 °C, and the relative humidity of the air 30-80 %.
|Preparation||Untreated wooden surfaces: Clean away dirt and dust. Sand if necessary. Wet the surface slightly, so that loose wood grain will rise up. Let it dry and sand down.
Previously treated surfaces: Wash down previously varnished surfaces with Maalipesu cleaning agent and rinse carefully with water. Remove all loose and flaking lacquer with a scraper. Sand the entire surface with sanding paper and remove sanding dust.
|Lacquering||Stir Panel-Ace Titan thoroughly before and during application to ensure that the UV titanium and flatting agent are well-mixed in the lacquer. Thin with water if necessary. Apply 2 coats in the direction of the grain. Treat the entire surface in one go to avoid overlapping. Sand the surface lightly after the first treatment.
|Cleaning of tools||Clean tools with water or with Tikkurila Pensselipesu (Tool Cleaner).|
|Maintenance instructions||At the earliest after approx. 1 month from application:
Clean the surface lightly with neutral cleaning agent (pH 6-8) using a damp squeezed cleaning equipment, smooth brush, sponge or cleaning cloth. The surface must not be left wet. Very dirty surfaces can be cleaned with a slightly alkaline (pH 8-10) detergent using e.g. a cloth, mop or sponge. Rinse the surface thoroughly.
|Maintenance treatment||Maintenance lacquering of Panel-Ace Titan can be done with the same or a similar water-borne lacquer.|
|EU VOC 2004/42/EC-limit value||(cat A/e) 130g/l(2010). Paneeli-Ässä Titan contains VOC max.130 g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|mli011106 / lko141106 / tho021106 / 005 3165|