Tikkurila worldwide
(Previous date 28.05.2010)'

Paneeli-Ässä Titan (Panel Ace Titan ) - Panel Lacquer

paneeli assa titan
DESCRIPTION Semi-matt, water-borne acrylate lacquer for interior use.

Panel-Ace Titan contains an inorganic protective agent (UV titanium dioxide) which effectively filters off the UV-radiation of the sun and ensures long-lasting protection against darkening of wood. 

RECOMMENDED USES Panelled walls and ceilings, log surfaces and other similar light-coloured wooden surfaces. Dry lacquer surfaces are slightly whitish. Panel-Ace Titan is not suitable for treatment of dark wood surfaces.

  The paint is suitable for interior walls The paint is semi-matt The paint is water-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Gloss grade Semi-matt
Coverage 8 - 12 m2/l for sawn surfaces
Can sizes 1 l, 3 l and 10 l
Thinner Water
Application method Brush and spray
Drying time at 23°C and 50% relative air humidity

Dust dry after 1/2 hour, sandable and re-coatable after 2-3 hours. Ready to use on the following day. The lacquered surface achieves its final hardness after 1 month.

Solids volume 24%
Density n. 1.0 kg/l ISO 2811
Storage Protect from frost.
Product code 005_3165

Application conditions The surface to be treated must be dry, the temperature of the air at least +10 °C, and the relative humidity of the air 30-80 %.
Preparation Untreated wooden surfaces: Clean away dirt and dust. Sand if necessary. Wet the surface slightly, so that loose wood grain will rise up. Let it dry and sand down.

Previously treated surfaces: Wash down previously varnished surfaces with Maalipesu cleaning agent and rinse carefully with water. Remove all loose and flaking lacquer with a scraper. Sand the entire surface with sanding paper and remove sanding dust.
Lacquering Stir Panel-Ace Titan thoroughly before and during application to ensure that the UV titanium and flatting agent are well-mixed in the lacquer. Thin with water if necessary. Apply 2 coats in the direction of the grain. Treat the entire surface in one go to avoid overlapping. Sand the surface lightly after the first treatment.
Cleaning of tools Clean tools with water or with Tikkurila Pensselipesu (Tool Cleaner).
Maintenance instructions At the earliest after approx. 1 month from application:
Clean the surface lightly with neutral cleaning agent (pH 6-8) using a damp squeezed cleaning equipment, smooth brush, sponge or cleaning cloth. The surface must not be left wet. Very dirty surfaces can be cleaned with a slightly alkaline (pH 8-10) detergent using e.g. a cloth, mop or sponge. Rinse the surface thoroughly.
Maintenance treatment Maintenance lacquering of Panel-Ace Titan can be done with the same or a similar water-borne lacquer.
EU VOC 2004/42/EC-limit value (cat A/e) 130g/l(2010). Paneeli-Ässä Titan contains VOC max.130 g/l.

according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
mli011106 / lko141106 / tho021106 / 005 3165