Tikkurila worldwide
(Previous date 28.02.2008)'

Jehu - Alkyd Primer

Jehu Alkyd Primer
DESCRIPTION Sealing alkyd primer for interior painting.

Suitable for priming and undercoating of wood, wood fibre board and card board surfaces.

RECOMMENDED USES Doors, windows and furniture.

  The paint is matt The paint is solvent-borne Tool: roller Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints AP
Colour Range Can be tinted to all colours of Tikkurila Symphony 2436 colour card. Use only half of the colourant amount of the Symphony shade formula. The shade accuracy is not perfect.
AP base paint can be used as white and tinted.
Gloss grade Matt
Coverage Approx. 10-15 m2/l, depending on the absorbency of the surface as well as on the spreading technique.
Can sizes White 1/3 l
Base Paint AP 0,9 l, 2,7 l, 9 l

Thinner Alkyd thinner 2010
Application method Brush or roller.
Drying time at 23°C and 50% relative air humidity Dust dry after 1 hour. Ready to sand and recoat after 24 hours.
Solids volume 60 %
Density Approximately 1.6 kg/l white, ISO 2811
Storage Unaffected either by cold storage or transport. Poorly closed or short canisters do not endure long storing.
Product code 211_6001

Application conditions The surface must be thoroughly dry. The temperature of the air should be at least +5°C, and the relative humidity of the air below 80%.
Preparation Unpainted surfaces:
Remove dirt and dust from the surface. Treat knots with Oksalakka Knotting Lacquer.

Previously painted surfaces:
Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Fill holes and cracks with Presto Furniture Filler or Lakkakitti Lacquer Putty. Sand the filled sports and remove sanding dust.
Priming Stir Jehu Primer well and thin with approx. 5 % Alkyd Thinner 2010 for priming of wooden surfaces. Jehu Primer does not normally need to be thinned for the next coat or for grinding painting. Apply Jehu by brush or roller.

Cleaning of tools Clean tools with White Spirit 1050 or Tikkurila Tool Cleaner.
Maintenance instructions If needed, clean at the earliest approx. 1 month after the painting work.
Clean surface with a neutral (pH 6-8) dishwashing agent and a soft brush, sponge or a dust rag. Very dirty surfaces can be cleansed with a cleaning cloth or sponge using a weakly alkaline (pH 8-10) detergent. Rinse surface carefully after maintenance.

Handle the surface with care, ultimate durability and hardness is reached in approx. a month under normal circumstances. If cleansing is needed soon after the treatment, gently clean with a soft brush or a damp cleaning cloth.
EU VOC 2004/42/EC-limit value (cat A/g) 350g/l(2010)
Jehu contains VOC max. 350g/l.

according to Regulation (EC) No. 1272/2008
Contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics FLAMMABLE. Use only in well-ventilated areas. Do not breathe vapour/spray. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. Contains methylethylketoxime. May produce an allergic reaction. A Material Safety Data Sheet is available on request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT VAK/ADR: 3 III, Drums/vessels < 450 litres: not subject to ADR because of high viscosity
sre211013 / ssa270208 / kmm251013 / tpi250308 / 200020-