PRODUCT DATA SHEET
(Previous date 01.04.2010)'
Supi Saunasuoja (Sauna Finish)
|DESCRIPTION||Water-borne tintable acrylate finish for interior surface treatment of humid rooms. Supi Sauna Finish seals surfaces against moisture and dirt. Contains anti-mould agent that protects the treated surface.|
|PRODUCT FEATURES||Suitable for use on wood, wood fibre board and concrete surfaces according to instructions for use.|
|RECOMMENDED USES||Especially suitable for walls and ceilings in steam, washing and dressing rooms. Not suitable for treatment of benches.|
|Colour Range||Tikkurila interior wood stains and lacquers colour card.|
|Building material emission class||M1|
|Can sizes||0,9 l, 2,7 l, 9 l.|
|Application method||Brush or spray.
|Curing||Dust dry after approx. 1/2 hour. The next coat can be applied after 2-3 hours. Ready for use in approx. two days.|
|Solids volume||Approx. 16 %.|
|Density||1.0 kg/l, ISO 2811.|
|Storage||Protect from frost.|
|Application conditions||The surface to be painted must be dry, the temperature of the air at least +5ºC, and the relative humidity of the air below 80 %.|
|Preparation||New, clean wood surfaces:
Remove all dirt and dust from surfaces. Moisten the surface lightly with a water spray, allow to dry and sand off any protruding wood fibres. Remove the sanding dust.
Old and dirty or e.g. previously with Supi Sauna Finish treated surfaces:
Wash with Supi Saunapesu Cleaning Agent according to instructions, rinse carefully and allow to dry. Sand if necessary and remove sanding dust.
|Sauna protection||Stir SUPI Sauna Finish thoroughly before and occasionally during application. Apply one coat of tinted or untinted Supi Sauna Finish on the walls of steam room. Thin with water if necessary. You can also apply two coats of tinted Supi Sauna Finish thinned 50 % with water on the walls of steam room. This way the visible brush marks are minimized. Apply two coats of Supi Sauna Finish on the wood surfaces of washing and dressing rooms. Thin tinted Supi Sauna Finish 20 % with water for the first coat, thin clear product only if needed.
Test the product on a piece of wood to ensure that the colour of the tinted product is correct. The colour appears lighter and more translucent than in the colour card, when the product is thinned. The final colour of the surface depends on timber species and the number of treatments. Treat small surfaces in one go to avoid overlapping; treat large panel surfaces a few boards at a time to get a uniform colour.
|Surface treatment||Pre-heat the sauna before taking into use and ventilate it well.|
|Cleaning of tools||Clean tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended when cleaning hardened finish from the brush.|
|Maintenance instructions||At the earliest after 1 month from treatment.
Clean the surface with Supi Sauna Cleaning Agent (1-2 dl of cleaning agent into 5 litres of water).
|EU VOC 2004/42/EC-limit value||(cat A/f) 130g/l(2010)
Supi Sauna Finish contains VOC max. 130 g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety Data Sheet - SUPI SAUNASUOJA Sauna Finish|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|TRANSPORT||VAK/ADR: not classified|
|sre070612 / niear141111 / lko141106 / tho031106 / 868 6404|