PRODUCT DATA SHEET
(Previous date 26.11.2012)'
Betolux Akva - Floor Paint
|DESCRIPTION||Water-borne polyurethane-acrylate paint for interior concrete and wooden floors.|
Interior concrete and wooden floors. Also suitable for repainting floors previously painted with alkyd and epoxy paints, or treated with epoxy varnish.
|RECOMMENDED USES||Concrete and wooden floors and stairs in residential, commercial and storage premises. Also concrete floors in saunas and humid rooms. Suitable for interior concrete and wooden floors subjected to light mechanical and chemical stress.|
|Base paints||A and C|
|Colour Range||Tikkurila Floor Paints colour card. Additionally large part of colours in Tikkurila Symphony colour card.|
|Building material emission class||M1|
|Can sizes||0.9 l, 2.7 l, 9 l, 18 l|
|Application method||Brush or roller.|
|Drying time at 23°C and 50% relative air humidity||
Dust dry after approx. 15 min. Ready to use the next day. Completely cured and reaches final durability approximately in 2 weeks.
|Chemical resistance||Resists White Spirit and Denaturized Spirit. Does not resist strong solvents e.g. Thinner.|
|Solids volume||approx. 35 %|
|Density||approx. 1,1-1,2 kg/l, ISO 2811|
|Storage||Protect from frost.|
|Application conditions||The surface to be painted must be dry and at least 4 weeks old, with concrete relative humidity less than 97%. During application and drying, the air, surface and paint temperature must be at least + 10 º C, and relative air humidity less than 80 %.|
Concrete floors: Remove cement glue coat with a grinding machine. Remove grinding dust.
Wooden floors: Remove all dirt, oil, dust and grease.
Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu (Cleaning Agent), rinse thoroughly with water and allow to dry. Remove old, flaking paint. Sand the surfaces carefully and remove sanding dust.
|Application||Stir the paint thoroughly before use.
Concrete floors: Apply Betolux Akva Primer OR one coat of Betolux Akva diluted 10% with water to new concrete floors. Finish new and previously painted concrete floors with 2-3 coats of non-diluted Betolux Akva. Use a short-pile roller or synthetic brush for smaller surfaces.
Wooden floors: Apply 1-2 coats of Multistop Isolation Primer on bare wood surfaces. Finish with 2-3 coats of non-diluted Betolux Akva. Use a synthetic brush. NB. Paint will dry quickly, so plan your work beforehand to avoid paint joints. Apply lengthwise to several planks at once, and only make repairs when the paint has dried.
|Cleaning of tools||Clean tools with water or Tikkurila Pensselipesu (Tool Cleaner).|
|Maintenance instructions||The painted surface reaches its ultimate abrasion and chemical resistance approx. 2 weeks from the surface treatment, during that time avoid cleanup. Clean the surface with a brush, a mop or a rag. Clean soiled surfaces with cleaning supplies using neutral (pH 6-8) detergent.|
|EU VOC 2004/42/EC-limit value||(cat A/i) max.140 g/l (2010).|
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|TRANSPORT||VAK/ADR: not classified|
|sre160915 / dco111108 / mli130109 / ars190109 / 4126001-|