PRODUCT DATA SHEET
(Previous date 18.12.2013)'
Akrostop Sealing Paint
|DESCRIPTION||Waterborne acrylate sealing paint. Prevents bleeding caused by nicotine, soot, liquid drawing ink and hides dried moisture damaged spots.|
Akrostop is suitable for both new and already painted concrete, plaster, brick, putty, fibreboard, plasterboard, wood, panel, log and woodfibreboard surfaces according to instructions. Also suitable for other objects in which the risk of bleeding is obvious. Akrostop is not suitable for use on iron or steel surfaces. Does not prevent the seepage of resin gum. Do not mix the product with other products.
|RECOMMENDED USES||Interior walls and ceilings|
|Colour Range||Tinted white|
|Building material emission class||M1|
|Coverage||6-8 m2/l depending on the substrate.|
|Can sizes||1, 3 and 10 L|
|Application method||Brush, roller or spray gun.
- nozzle 0.015" 0.019"
- thinning 0-10 vol %
|Drying time at 23°C and 50% relative air humidity||Dust dry after 1 hour, recoatable after 6 hours.|
|Chemical resistance||Resists cleaning detergents and weak solvents e.g White Spirit|
|Heat resistance||85ºC, ISO 4211-3.
|Wet scrub resistance||SFS-EN 13300 class II, ISO 11998|
|Solids volume||Approx. 41 %|
|Density||Approx. 1.3 kg/l, ISO 2811|
|Storage||Protect from frost.|
|Application conditions||During painting and drying, the temperature of the air, surface and paint should be over +5 ºC, and the relative humidity of the air below 80 %.|
|Preparation||Remove dirt and dust from surfaces. Wash the surface with Maalipesu Cleaning Agent according to instructions. Fill holes and cracks with a suitable Presto or Prestonit filler, and sand the dry surface. Remove sanding dust.|
|Painting||Stir Akrostop well before use. Apply 1 to 2 coats by brush, roller or spray gun. Finish with a suitable finishing paint.|
|Cleaning of tools||Clean tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools.|
|Maintenance instructions||Earliest 1 month after treatment:
Clean the surfaces with a damp sponge or cloth and with a neutral (pH 6-8) detergent. Thinning instructions of the manufacturer must be followed when mixing the solution.
The surface must not be left wet after cleaning.
After treatment surfaces must be handled with care for a few weeks, because the paint will achieve its final hardness and durability under normal conditions after 1 month.
If surfaces must be cleaned soon after finishing, clean the surface lightly with a damp cloth.
|EU VOC 2004/42/EC-limit value||(cat A/g) 30g/l (2010).
Akrostop contains VOC max. 30g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Wear protective gloves. A Material Safety Data Sheet is available on request. Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|TRANSPORT||VAK/ADR not classified|
|sre150415 / mli231006 / joa020209 / lko141106 / tho141106 / 006 5663|