PRODUCT DATA SHEET
|DESCRIPTION||PVAc dispersion and starch-based ready-to-use glue for walls|
|PRODUCT FEATURES||For attaching non-woven wallpapers.|
|RECOMMENDED USES||Wall surfaces in dry interior premises.|
|Building material emission class||M1|
|Can sizes||3 l|
|Application method||Roller, brush|
|Solids volume||approx. 13%|
|Density||approx. 1.02 kg/l, ISO 2811.|
|Storage||Protect from frost. Store in dry and cool place, protected from sunlight. Opened can should be used within one month. Close the lid carefully for next use.|
|Application conditions||The surface to be treated must be dry, the temperature at least +15°C, and the relative humidity of the air below 85 %. Wallpaper and glue should be warmed up to the normal air temperature of the room before the installation.|
|Preparation||Remove old loose wallpapers and paints, as well as textured wallpapers and the plastic surface of vinyl wallpapers. Fill any uneven areas with a suitable Presto product. Prime porous substrates e.g. with Varma Primer or prime with Duett glue thinned with water 1:1.
Wash down previously painted surfaces with diluted Maalipesu detergent and rinse carefully with water.
|Wallpapering||Apply glue onto the wall with a roller, covering the equivalent of 1.5–2.5 wallpaper widths at a time.
Apply the wallpaper directly to the pasted wall. Carefully smooth out the wallpaper moving from top to bottom using a plastic spatula, and be careful not to leave any air bubbles.
|Removal of glue stains||Immediately wipe off any paste that seeps out between the seams with a clean, damp sponge.
|Cleaning of tools||Remove excess glue from the tools and wash down with water. Tikkurila Tool Cleaner is recommended to remove a slightly hardened product.|
|Maintenance instructions||Wipe the stains with a cleaning cloth moistened in warm water and using a mild detergent. Rinse off carefully and wipe the surface dry. Avoid water contact with the seams.|
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. Wear protective gloves. A Safety Data Sheet is available on request. Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|ser031214 / mkv04112014 / akk121214 / 0083700|